Liczymy pasujące modele…
Logitech G x56 HOTAS Custom Panel Labels These are customizable panels for the Logitech G x56 HOTAS - Throttle. This allows you to create custom labels for your switches and rotary dials to be 3D printed. SLA Printer is preferred, as it…
UPDATE: i made a new version of this as a remix. Its not quite the same and requires you to have transparent PLA, but looks much better and requires no tape to be visible. Faceplate for the Logitech x56 HOTAS. it has labels for Elite:…
I made the detent more pronounced, and reduced the pressure on the nubbin so that it doesn't rub on the part until it comes in contact with the detent. Snaps snuggly into the throttle slide, with no need for additional supports on the…
Remixed to use a metal clamp I located on Amazon . Here is the link: https://www.amazon.com/gp/product/B07BHXXR4D/ref=ppx_yo_dt_b_asin_image_o08_s00?ie=UTF8&psc=1 WALI C-Clamp Base Stand Mounting Accessory for WALI Monitor Mount…
Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…
I modeled and printed some custom zero stop rings for my Vortex Strike Eagle 5-25x56. I figured I would post as I had seen some people asking about custom ones online when I was looking. I printed in PLA for now, but I am sure that it…
Remade my faceplate design from scratch for the hell of it. made both this time. print the first layer in transparent PLA and the rest in whatever else. i realize now that the verticle switch labels may be a bit confusing. oops
Maske für die Hasselblad V-Serie, zu platzieren über der Sucherscheibe. Die Maske hat den Ausschnitt 35 x 56 mm, wenn man den Kleinbildfilm mit den Sprocketholes belichten will. Gedruckt in PLA mit 100 % Füllung damit die Maske halbwegs…
The Synology WRX560 wireless router/access point doesn't have any holes or come with any wall-mounting hardware. This model offers a solution by providing a wall-mountable platform with clips that hold the router securely. Requires…
Designed as an alternate option for the 4 way throttle button. Slip on fit. Printing: Minimum/no infill should work No supports needed when printed from base. Shrink/enlarge to get the fit you want. Print Settings Printer Brand: Creality…
Rifle scope cover with front 65 mm and rear 43 mm diameter. This is Nightforce NXS - 5.5 - 22 x 56 mm. Print with no supports, PLA
X56 and x55 comfort kit and VR helper, I made this when I got a new X56 and found My hand was to low to reach the top hat switch and the top button on the joystick, and as you can't see the buttons in VR, I made this so I could identify…
Torreta paralaje para nikko stirling diamond 10-40x56, recomiendo imprimir en abs o materiales que aguanten bien la temperatura. Necesario un tornillo de metrica 3 y su turca correspondiente.…
Konnte keine passende Schachtel für die 35 x 56 mm Maske für die Hasselblad V-Serie finden, also hab ich eine gemacht. Innenabmessungen: 60 x 60 mm, 3 mm Höhe. Gedruckt mit PLA mit 0,1 mm Schichthöhe wegen der feinen Nasen die in die Nut…
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
These are designed to be two part replacements for the hat switches on the Logitech/Saitek X56. Print the stem in transparent PETG with a raft transmit the RGB lighting better than stock. Then print the caps in TPU and press fit them on.…
This is the "Double A" sibling of my rugged battery box series. It is designed to securely store and protect a large number of standard AA (LR6) batteries . Designed with the same robust philosophy as the 18650 version, this box features…
This is a set of hat covers for the X56 joystick and throttle. They give a bit more control than the standard rounded or sloped heads. The smaller digital and analog hats slide on and are a snug fit. The larger joystick hat on the top…
Reference model for IKEA SKADIS 56x56. Fusion 360 and STEP files included.
Prints without supports, I used 2 processes so that the Joystick platform would be nice and strong: Joystick platform 70% infill Mounting Arm: 25% infill To mount X56 Joystick and Thruster to these platforms you will need 8* M5x60mm…
Verry snug fit, needs a bit of a hand and wiggle
Sized to fit ~8 cards. The photo is with 7 (all I carry). Internal dimensions: 87 mm tall 56 mm wide 10 mm deep Side snap case lid. The seal is cleaning filament, the pins are welding rod (2.2 mm) but filament may work. I have the source…
I had a heating problem and needed a second radiator for the Thermaltake core P5, i chose the biggest radiator I could find and installed it on top just to be sure. I know it is a very specific case, but maybe someone can find it useful…
This model is designed to provide better reachability for top hat switch on x56 throttle. This also helps with distinguishing between different switches, adds traction and helps remove possibility of triggering multiple controls at once.…
Butchered my way with OpenSCAD and added the middle plate for the rotary encoders to the original design by tarpaper . The hole positions is not 100% perfect but close enough and is hidden under the knobs anyway so I didn't bother…
A turret for my Delta Scope! Use M2 heat insert and small screws to lock the rings
MOST IMPORTANT!!! IF YOUR X56 IS UNDER WARRANTY, USE IT FIRST!!! This guide is for when that is not an option. - This is my 2nd Logitech X56 HOTAS, and probably my last. It worked fine UNTIL I found the throttle grips starting to wobble…
A simple faceplate that sits on the bottom bezel of the Sony XAV-AVX5600 headunit and covers the screen. This was intended as theft prevention and to look like a blank in the radio location. Living in an area with high rates of car…
To use this in a game, simply go into the in game settings and set the handbrake to when you pull the stick back on the x56. I am not sure if this attachment works on other sticks as I only have the X56. My print time was about 3-4 hours…
I had an old HOTAS setup that screwed onto the armrest to hold itself on. Since I just bought a very expensive gaming chair (as opposed to the $50 one I had before) I didn't want to damage the armrests. Since the Secretlab Titan has the…
Hardware needed: M3x10 countersunk screw M3x3 Heat set insert Since it will most definitely will be used outside a lot I suggest printing in ASA. Printed my own solid with only walls. Included Solidworks file and step for anyone who wants…
Repairing a Broken Logitech X56 Throttle
Hardware needed: M3x10 countersunk screw M3x3 Heat set insert Since it will most definitely will be used outside a lot I suggest printing in ASA. Printed my own solid with only walls. Included Solidworks file and step for anyone who wants…
The original pinholder has a tendency to break with age. A simple fix for an expensive piece of gear.
Logitech X56 HOTAS SKÅDIS Wall Mount A simple wall-mounting bracket for the Logitech X56 HOTAS throttle and joystick , designed to mount directly to an IKEA SKÅDIS pegboard. The same mount works with either the X56 throttle or joystick ,…
If you find my designs useful, please consider sending a tip I wanted a way to stop the top rotary dial (marked F) from moving on the Logitech x56 HOTAS Throttle and created this lock shim. Just slides under the dial and holds it in…
Parts to be assembled and glued. The turrets are fixed. Tolerance 0.2 Made for riflescope mounting training. Pinted in PLA
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
Reference model for IKEA SKADIS 56x56. Fusion 360 and STEP files included.
The original pinholder has a tendency to break with age. A simple fix for an expensive piece of gear.
I have a card cutter that trims to 86x54mm, and I often use it to make board game cards or other small custom cards. The sleeves I use are 87x56mm, and they fit perfectly snug into this card box—it’s incredibly satisfying! Today, I…
Customized version of https://www.thingiverse.com/thing:735213 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=735213 Instructions Using the following options: tube_diameter = 32 spool_diameter = 56…
This is a holder for a typical LED-strip remote control that I created. It is made for remote controls with size 124x56x8mm. It is fixed to a surface via two screws (cone head) or glued with a double-sided tape. Please consider a small…
Model of the .303 British cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…
