Liczymy pasujące modele…
This mini mixing pad is designed for fast, mess-free glue and epoxy work. It features a built-in snap-off mixer and a smooth, disposable surface ideal for small repairs, woodworking, crafts, and general workshop use. Prints flat, no…
I increased the height (up to 5.5 cm inside) of the excellent 3D model of Plastic bag roller from Andrey Shayter so that boxing Hand Wraps could be placed in it (or any other wide tape) . Saves a lot of time. Thanks to Andrey Shayter for…
Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…
A tiny mixing tray for glue, epoxy, resin, or whatever sticky stuff you’re working with today. It has a little holding tab so you can hold it in your hand, or pinch / clamp it to the edge of a table to keep it from sliding around. Great…
Prichádza čas dovolenky, takže vytvorme atmosféru odpočinku a relaxácie In the 3mf part of the hammock, set the number of upper and lower layers to 0 and the value of the infill to 8-10%, the shape of a straight line and 3 perimeters…
If You have some nearly empty spools laying around, you can print some of these mixing spatulas with the infamous last meters. They come in handy for mixing 2 part compound adhesives, glues and sealants. I have alway some spare laying…
I created this cutter to open boxes. Unlike many other blades, in addition to its attractive design, it features concave and convex shapes to improve grip during use. Additionally, the flat part of the blade allows for lifting labels to…
Features: - only 10g of filament is used - perfect for using up the remaining bit of filament - spatula snapping points are not located on the handle instead of on the tip (easy to break off too) - spatula radius matches internal tray…
Recomended to print with PET-G, ABS or any car temperature resistant material. You will need to buy 50 mm wide velcro. To atach the velcro to 3d printed holder i used MAMUT glue (one-component adhesive with high adhesion) but i think you…
A compact, stackable disposable mixing pad with a small integrated spatula, designed for mixing epoxy, resin, glue, and other adhesives. Quick to print and using only a few grams of filament, this model is perfect for fast workshop use…
Boxhandschuh als Schlüsselanhänger Boxing glove keychain
Ditch the overflowing jewelry boxes and tangled rings! This stunning 3D printed jewelry tree offers a stylish and functional way to organize your collection. Crafted using eco-friendly 3D printing technology, the design features a…
Paint mixing container suitable for airbrush. You can find another model here: https://www.printables.com/cs/model/364157-airbrush-paint-mixing-container-version-2
Pendant in the shape of the boxing gloves. 20% infill. Printing with supports.
Expensive to buy, cheap to print, found a nice design and changed it so it fits my needs better original author is https://www.thingiverse.com/airfield20/designs
It's a M-10AF Lexington from Cyberpunk 2077 with movable magazine and shutter Videos about this model: https://vm.tiktok.com/ZSJBu1mJ2/ https://vm.tiktok.com/ZSJBmwtf6/ https://vm.tiktok.com/ZSJBujJXk/ Print Settings Printer: Artillery…
Two sizes: 70mm and 40mm diameter. Watch the Video: https://www.instagram.com/reel/CkjCa6CjjpO/?utm_source=ig_web_copy_link Like it? Please don’t forget a like any maybe a follow, thanks a lot 😊 For more Project’s and insights, see my…
T-Slot Nut M3 / M4 / M5 / M6 Thread / Twist in fixing nut for PRUSA Alu Profile -Update 24/01/2025: added Tslot Fixing Nut Prusa Alu Profile.stl Scale/Resize to adjust dimensions All our designs are free to download and use—because…
A 9 bay paint mixing tray, made for small amounts of hobby paint. One larger section with ridges on one end to make cleaning the brush quick and easy. A chamfered corner in the brush cleaning area to make it easier to empty it out without…
A disposable mixing pad with a small spatula designed for mixing epoxy glue, resin, or other adhesives. Quick to print and using only a few grams of filament, it’s perfect for fast workshop use without cleanup. Ideal for printing from…
Sovol SV06 Plus is a great printer, but its bed heating cables are not fixed resulting a safety issue. With this solution first 20mm will be fixed. Don't forget to print it from ABS or other hi-temp material. Installation requires 10…
Love the remix that Comrade 3D did, but I needed to add a built-in tensioner to flatten out the wrap as it's being rolled. The existing model is great, but I found I needed a 3rd hand to keep things tidy - this remix is to help with that!…
Orient and print in vase mode to create a small mixing/pour cup. Or, orient with the large side (top) down, to print template for vacuforming. I used PLA with 4 walls, 6 top layers, 50% infill and there's no deformation of the templates.…
This fixture is used for indexing work using a vise and square for 45, 60, and 90 degree angles. Of course this printed version is not going to be as durable or precise as the commercial metal version, but should still be useful for many…
Airbrush paint mixing container - version 3, printing without supports.
The ergonomic thumb recess provides much better control , helps keep your fingers away from the nasty, sticky stuff in the tray. Has a left (LH) and right-hand (RH) version, A right-handed person will normally use the RH tray in horizonal…
First: This is not mine. I had several of these and overtime things happen, and I needed more. I couldn't find the design or print file, and went looking for it, and couldn't find where I downloaded it either. I finally gave up and tried…
An epoxy mixing set that consumes about 2.2m filament, good to print a few for your last meters. Updated with a version 2 with one slanted and toothed spatula in one end and a straight flat in the other. Small quality of life improvement.
Needs only approx 2m of filament (6g). Suggest to print with 6 walls to avoid infill on the spatula. One STL file with tray and spatula, can be split into individual objects in slicer.
As a kickboxer, I wanted to have an accessory related to martial arts.. so here you go :)
Epoxy mixing spatula & spreader Combined stirrer, applicator for the Epoxy Work Station I joined the tools to make one tool instead of two. I increased the thickness of the tool ends to make them less floppy and reduced the thickness of…
UPDATE: Issues should be fixed now. Changes have been made only to the mouthpiece, so this is the only part that needs to be reprinted if you have attempted previously. Please feel free to inform me of any further issues. Disclaimer: This…
2024/06/12 Update: Added the piece that allows the camera to be attached directly to the X axis motor. To place the camera, in addition to the box that protects it (capuchonSuperior and capuchonInferior), It will be necessary to use the…
A truly stackable, small epoxy mixing tray - perfect for using up the last meters of your filament! Ultra-light: Uses only 3.6g of filament. Ergonomic: Unique shape makes it very easy to hold and handle. Print without support.
This is a replacement mixing nozzle for the 2K epoxy adhesive cartridges from UHU. With this glue I like to glue larger components or generally components which must be firmly bonded together. Unfortunately, only two mixing nozzles are…
So you washed your boxing wraps, but do you dread winding them up by hand into little spools? The Master Wrap Machine 5000 does this for you in no time! Features: Simple, robust, functional design. Build to last. Handles a wide variety of…
Has your Dummy 13 been “Chalk Lined”? Too weak in the knees to even stand up? After printing your Dummy 13 or other articulated model, you may have a loss in stiffness of the model when the 3D printed joints wear or stretch. This can…
I bought a 9-piece set of sharpening stones for Stefan's CNC Kitchen knife sharpener ( https://www.printables.com/model/81237-knife-sharpening-tool-v21-with-video ), but needed a way to store them. There are cases for smaller sets but not…
For my aquarium, I needed a hose holder. The tube was constantly falling and I was making a flood. I couldn't find what I needed so I took a few other pieces and cut and put them together. I use petg plastic and standard settings. The…
This time it's a boxing Hulk. Print instruction same as on the other Model. Still improving my rendering skills, hope you like the model. Tell me if you want some changes or other poses.
Paint mixing container suitable for airbrush - version 2, printing without supports.
This is a folding, print in place watercolor palette. I developed this because I wanted a tray with fewer paint wells and more mixing spots than any of the trays on Amazon Let me know in the comments how it works for you and if there's…
For best washability, print in PETG.
A miniature stackable mixing cup designed for paints, stains, oils, inks, resins, and similar liquids. The cup features a small pouring spout for easier and more precise dispensing while helping reduce spills and drips. Each cup weighs…
Print instructions Print settings: 0.20mm QUALITY Filament: PLA 20% Grid infill 4 perimeters 5 solid layers top and bottom If you require a different model or size, please do not hesitate to contact me.
Tested with 0.4mm nozzle PLA 10% fill, no special settings (except for spinner) Step files should be correctly oriented. The spinner has a ring to help it stay connected to the lid. The lid screws onto the body. Slide the velcro strap…
Base to securely hold an Airtag within luggage interior. Foam tape to hold base. Cover plates slide and clip onto the base to hold the Airtag in place - intent is to keep the antenna as close to case exterior as possible. Printed PLA…
This design requires the following parts: (2) 3D printed ski stands (2) Clamping tool (quick clamp or c-clamp) Some sort of adhesive friction material This design allows you to clamp the stands at a spacing of your choosing (wider is more…
This is a series of mixing cups with a spout shape so that you can pour accurately without product dripping down the sides. The spout is not too big so it doesn't interfere with complete stirring. I made them for use with 2-part resins,…
Handy unboxing knife for your keychain with optional snap on cover
Use tree supports on build plate only. A compact disposable glue mixing pad with a small roller applicator. The tray can be used for mixing and holding glue, epoxy, resin, or other adhesives, while the roller helps spread the material…
Mini Airbrush Paint Mixing Cups, useful for thinning paint for airbrushing. I found that when mixing paint directly in the airbrush cup, pigment clumps would lead to clogs more often. Medicine or Sauce containers are relatively easy to…
This is a card with detachable pieces that can be assembled into a relaxing handheld toy. Each piece is designed to fit precisely – simply slide and snap them together without the need for glue or screws. The connection tolerances are…
A handy little disposable tray and break away stir stick for mixing two part epoxy. Hopefully it will be more useful than popsicle sticks and a scrap piece of cardboard.
Modern Decor – Relaxing Rabbit Bring a sense of calm and style into your home with this modern decorative sculpture of a relaxing Easter bunny. Its minimalist design and soft, neutral colour create a timeless look that fits beautifully in…
TETRAHEDRAL MOUNTING BRACKET - STAFFA TETRAEDRICA Flexible Fixing Grid (Up to 9 Points) | Filament-Optimized Design --- ## 📐 Product Overview - Dimensions: 60mm x 60mm (Base) - Mounting Points: Grid design with up to 9 available fixing…
By the end of september, i will pick the best photo of a make and give a shoutout of them on the next model!
Hola :) Para armarlo solo necesitarás un cautín o taladro para hacer los agujeros e introducir la pieza que funcionará como bisagra, estos entraran perfectamente, te recomiendo que le pongas una gotita de kolaloka para unir la bisagra y…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Hello, This accessory prevents the sheets from coming loose, and the tabs keep them securely in place. It's sturdier than the basic model and not as high. the supports are already in the model Thank you for your feedback.
This a remix of the fist for Lucky 13 and a Boxing Gloves keychain by AnthonyM . I printed mine with black PLA and painted it with red paint. Print with tree supports, 0% infill, touching buildplate only. For the left hand, just mirror…
Small cup to prepare your airbrush paints.Easy and fast print without supports. 24 mm tall If my work inspired you, a coffee would make my day. https://buymeacoffee.com/odemir
I made this as I was missing a place for hanging my boxing gloves after training. They dont dry well in my training bag so I had to find a solution, this is it! For the first part of the print, up until the spikes, use 20% infill. After…
Want to print something unique to decorate your car with? You can use some braided string or a beaded chain to hang these boxing gloves from the rear-view mirror. The creases on the glove pick up nicely in the light, especially with some…
Building instructions in separate PDF. Note: See the following page for a printable fixing plate with real NEM 380 pins: https://www.printables.com/model/1180883-nem-380-container-fixing-plates-in-h0-scale-187
Just a simple mixing stick. Enjoy. Infill: 100% Category: Replacement Parts
You can print in any colour you want. Example was printed in PLA+, 1.33 g, ~6 minute to print on V3 KE. Use the two M3 screws that came with the printer original clip.
Description This assembly allows you to fix objects to the wall by turning them a quarter turn. To do this, you need to fit the 2 pieces together and make a quarter turn until you come to a stop. I used this principle to attach the shell…
Remixed it with 2 and 3 ribs to have it firmer for heavy load, so I can use less of them. Print it with the holes on the plate (like the original one). Print settings Material: PETG (or any other material that can handle the load).…
Layer height: 0.2 Filling: 10% Wall thickness: 1.32 Material temperature: 200 (PLA from print to batch) bed temperature: 60 Flow: 100% Speed: 60 recomended Supports: Yes
Design Concept Its helical structure provides a unique spinning sensation that differentiates it from traditional fidget toys. Purpose This DIY spinner is designed to provide stress relief and promote concentration, suitable for…
Packout rail wheel bracket Bracket will fix to packout rail and hold the spinning wheel Printed in PETG 60% infill adaptive cubic 0.42 layer height Printing Remember to mirror the second part Add pause to layer where the hexagon space for…
Držák adaptéru Sonoff Zigbee 3.0. Pro připevnění na polici nebo na zeď pomocí dvou šroubů. Adaptér je zajištěn v držáku zasunutým USB konektorem a našroubovanou anténou na druhé straně. Tiskárna: Longer LK5Pro Materiál: PETG, C-Tech,…
A simple tube with ventilation holes to make your boxing gloves dry faster. You obviously need to print one for each glove. This model can be customized by adjusting the parameters in OpenSCAD.
Hello. My proposal for creating battery packs for the size 21700 Print quality 0.2 Material: PLA , PLA + , PETG , Infill according to your reasonin
This is replacement for a mason Jar ring if you don't have the metal ring. Though I would not try to actually can using this ring. Mostly I posted this so that those of you out there not familiar with how to do the thread would have a…
A number of people requested the blank trophy from my 3D Printing Trophy series for various reasons. While I wasn't willing to distribute the original from that series, here is a variant trophy complete with .obj file. Remixing is…
Prints flat without any supports . You can use it to lay down the perimeter wire for your automatic lawn mower. You can also use it to lay down any cable you want this way. I used it for a 12V wiring for my garden lights. The grass will…
Boxing glove holder that also holds handwraps. I recommend using either 3 large command strips for gloves 12oz or less and 4 large command strips for 14oz or more. Please post pics if you decide to make this!
Bei meinem Elegoo Centauri Carbon habe ich ein deutlich sichtbares 2-mm-Wellenmuster festgestellt, verursacht durch die glatten Umlenkrollen der XY-Gantry . Der GT2-Riemen rutscht dort über die Rollen, und das wiederholt sich als Ripple…
Paint mixing cup, designed to help in mixing paint previous to pouring into an airbrush. Helps with the dilution check a
For this model you need to print 4 of every size oval. Start with the biggest 4 pieces and put them in the center two slots. Repeat this for the rest of the pieces.
Diffrent fixing mechanism for 3 storry 1:64 HotWheels lift. I chopped off the little cips that were finicky to print and never worked well for me. Insted the part now just fits into the poles with friction. It fiits quite well. I don;t…
Hello. My proposal for creating battery packs for the size 18650 Print quality 0.2 Material: PLA , PLA + , PETG , ASA Support as needed Infill according to your reasonin
Einfache Wand- oder Paneelbefestigung, passt auf jede Schraubengröße unter 5,5 mm Durchmesser. Drucken ohne Stützen. Simple wall or panel fixing, will fit any screw size under 5.5mm diameter. Print without supports.
Epoxy Mixing Beakers I recently worked my first project that called for 2 part epoxy to be poured into the final project. The process requires little disposable containers for mixing the epoxy My kit only included 2 (that were) the wrong…
This can be rescaled however you want and do need supports.
Ever had trouble with warped plywood on your laser cutter? You're not alone. I've designed a neat little tool to help : a Fixing Pin for your cutter's honeycomb plate. It keeps your plywood flat, so you can get those perfect cuts every…
Glue mixing applicator sticks for epoxy. Seven various glue applicator sticks for epoxy mixing and application. They are 60mm long but they can be scaled to any size required in your slicer software. Quick to print. Printed in PLA with no…
EN: The model is beautiful, but unfortunately designed in such a way that it cannot be printed properly in any position without supports. This is a disadvantage because the model itself is so tiny and breaks easily when the supports are…
Kids come home from Muay Thai. This allows the glove to open up more so it dries out faster and smells less.
I saw commercial version of this at the gym. Decided to make one myself. I have 2 small bridges for the wrap to go through and keep the roll tight. Works pretty well.
This is a remix of the mixing nozzle by @drho1337 to be compatible with the 14ml J-B Weld Clearweld Epoxy part number 50114. The ‘EZ Mixer' that comes with it is not available to purchase extras for. Optimized for fast printing with a…
Done for myself, but maybe someone will find this helpful as well. Story is simple. As I wanted to put my printed winder on plank, I found that somehow main body doesn't have a screw holes or anything else to fix it on surface (donor body…
This is a Disc mount with a blank backplate to be remixed onto any type of mounting bracket you would like. I modeled it from scratch in Fusion 360. This was my first project in Fusion. The bottom connection of the backplate to the ring…
Additional set of alternative Mini Mixing Pads I really liked the Disposable Mini Mixing Pad model. But I would have liked another arrangement of pads and spatulas. I think the mixing pad can find many different uses. All my variants are…
![Stackable Epoxy Mixing Tray [3.6g]](https://media.printables.com/media/prints/80602716-8b7f-4593-bdac-4f2ea6e558af/images/13502461_22b24bcb-4e55-4ddd-b8ca-cb3751a5364b_fda3fa44-8663-4b8f-9dbe-63d2bad1b503/img_4268.jpeg)
