36 modeli
This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors
In the project, there is the scaling necessary for the contraction of the ABS. It has additional support and perimeters. "YOU MUST PLACE THE METAL GUIDE PIN FOR THE SPRING" En el proyecto, esta el escalado necesario para la contraccion…
Replacement part for Dillon XL650 Press. Reinforced with thicker walls. Locking lug for secure installation (insert & rotate to lock). Can be used as a temporary replacement for the genuine Delrin powder bar reset bushing, but probably…
For ejecting the cases out of the XL750 and XL650, this replaces the ejector spring. I made this to provide clearance for the thrust bearing that I purchased to smooth my press. Uses an M3 set screw to lock in place. There's some…
I designed these holder to be compatible with my casefeeder mount and wall mount. It holds 5 Dillon primer tubes. I print them right side up. More free AzJake projects: https://azjake.com/pages/free-projects Print Settings Printer Brand:…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
Dillon XL650 and XL750 clamping toolhead. Requires M3 bolts, recommended at least 20mm long. Version 2: Added 5.2mm wide by 6.4mm deep hold on the underside of the locator to allow for the use of M3 heat-set inserts. McMaster Carr PN:…
This bushing is superior to the stock Dillon bushing which I broke. Print this on the flat side without supports as show in the picture. I used 30% infill with PETG and it's pretty solid. The hole needs to be chased out with a 3/16" drill…
This tool holder was designed to be simple and compact. It holds all the required allen wrenches for servicing a Dillon XL650 More free AzJake projects: https://azjake.com/pages/free-projects Other designs and files are available at:…
Three designs inspired by phucawf's design. As I was unable to make his design work on my XL650, as it does not have a Thrust Bearing, I designed these versions. The main issue I had with phucawf's design was that the case ejector would…
This part replaces the half moon shaped spacer on the casefeed support tubing. It is slotted to allow the 1/4" factory bolt to be re-used. It allows for multiple accessories and tool holders to be used. More free AzJake projects:…
This tool holder replaces the spacer on the casefeeder tube and is slotted to reuse the exiting bolt. It fits on the upper bolt. It holds all the standard tools included in the Dillon XL650 Bench tool set. It is built to positively index…
Designed to fit Dillon Precision Casefeeders these easily add male picatinny rails up high on your reloading press. They are a great place to hang primer tube holders or tools. More free AzJake projects:…
Here is a rack I made to store Dillon Precision XL650 Station 1 as well as the casefeed arm bushings. Their are locations for all available arm bushings and locators available on 1/2020. All spots are labeled. More free AzJake projects:…
3"x3" wall bracket that holds a primer system assembly when not in use. It features 2 threaded holes to also store the primer seater assembly. The rack was designed to hold the primer system right side up or upside down depending on your…
Here is a rack I made to store all my Dillon Precision Casefeed adapters. I mounts to the wall with 2 #8 standard wood screws or drywall screws. More free AzJake projects: https://azjake.com/pages/free-projects Available printed and ready…
This rack measures 2.5" wide and 8" tall. It has threaded holes that are labeled for the 5 common Dillon XL650/XL750 casefeed body bushings. It also has holes for 8 powder funnels. The alignment tool shown also fits. Decapping pins fit in…
A compact and organized way to store the 4 most common station locator buttons as well as a spare of each. This is compatible with all of my male picatinny rail mounts. They are labeled 1-4. More free AzJake projects:…
This is an adapter to allow use of the (inexpensive) Lee funnel case collator with the Dillon XL650, and perhaps other Dillon progressive presses. It snaps on the outside of a standard Dillon case feeder tube, and uses a 1/4 x 3" bolt…
This is modeled after a Glock 26 and dimensionally is very close. I printed it with the slide down in HattchBox Black PLA. This one uses a mount that replaces the half moon spacer washer on the casefeed tube and the pistol slides in place…
Upgrade your reloading setup with our sleek and sturdy Station 1 and Case Feed Arm Bushing Holder, designed to fit seamlessly with your Dillon XL650 or XL750 reloading machine parts. This custom-designed and 3D printed wall-mountable…
Replacement of the little thingy that keeps the spacer for the powder measure (if used with a small powder bar) in place. Fusion 360 file is included. Category: Sport & Outdoors
I enlarged the hole for the spring and beveled it as the spring was sticking inside of this parts.
Not my thing but can't recall where I got it from. I've uploaded all the files, if original author has issues with it being posted, please comment. I never printed this because it was too big for my bed at the time, and made the other…
Upgrade your reloading setup with our custom-designed and 3D printed Casefeed Adapter Storage Rack, compatible with the Dillon XL650 and XL750 reloading machines. This compact and efficient storage solution is perfect for keeping your…
Both examples hold 5 Dillon XL650 or XL750 Shellplates and are attached to the wall using 2 #8 wood screws or drywall screws. More free AzJake projects: https://azjake.com/pages/free-projects Available printed and ready to use at…
EDIT Just realized the piece that holds the tube is bigger than the original, I have an adapter for my use, so plan accordlingly! Remixed from wanousoubi for 45 acp. I scaled it up for 45 acp and took the guesswork out so you don't have…
ALL FUTURE MODELS WILL BE SHARED HERE: https://cults3d.com/en/users/antirice/3d-models USE THESE FILES AT YOUR OWN RISK I scanned my Dillon XL650 in both the up and the down positions. I wanted to be able to use these scans as a basis for…
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.
These are tool head holders for wall mounting. I made these as an alternative for the slide in ones. These are easier to print as well. Works with the XL650/750 Tool heads. I made the screw holes to work with the 50lb plastic anchors…
This is a remix from AZJAKE who made the orginal. Original here https://www.thingiverse.com/thing:4128450 AZJAKE: https://www.thingiverse.com/AzJake/about I remixed this so I can just have the bushings on the wall only. I keep the powder…
This is a remix from AZJAKE who made the orginal. Original here https://www.thingiverse.com/thing:4080449 AZJAKE: https://www.thingiverse.com/AzJake/about I remixed this so I can just have this on the wall. I also remixed for having all…
Summary This is a remix from AZJAKE who made the orginal. Original here https://www.thingiverse.com/thing:4128435 AZJAKE: https://www.thingiverse.com/AzJake/about I made this to hold every shellplate possible as of March 2020. For…
Magnetic Primer Catcher (Spent & Live) for Older Dillon XL650 Keep your reloading press and workspace cleaner and more organized with this magnetic primer catcher system, specifically designed for older-generation Dillon XL650 presses .…
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
