Liczymy pasujące modele…
The original model was the right width and depth I needed since my Bambu doesn't have that much room behind it from the wall. This remix model gives it a bit more height and uses pressed in magnets. no glue on the magnets. just some elbow…
I decided the easiest place for me to hang my headphones would be from the front of my Hyte Y40 case. The hanger works on the front or side by slotting into the grill on the top of the case. I have no way of testing the theory, but the…
I recently bought Magcubic Hy450 and created a simple cover that fits perfectly and protects the lens, so I am sharing it. I hope you like it.
Using Prusa Slicer negative volumns.
Blade Spacer for Ryobi battery powered lawnmowers. Part# 526920003 Fits RY401014US, maybe others..
Pour le montage: vis auto perforeuse de 8,12,16 en M2 que vous trouvez sur Ali express. Tube de diamètre 6 en carbone ou alu pour la fixation des bumpers camera et support antenne. à réaliser en TPU70D Video:…
DryFire Piece with Safety4 (Safety Rules) for Glock 17 my print with PLA is not the best. the text on top isn't readable. I will try this again, but I need red/orange color PLA
This is a set of pieces to help the Hyte Y40 intake air make it out the back vs the closest exit. This helps ensure air passed past the GPU/CPU and out the back/bottom more than just the closest exit. I'm not a thermal engineer but this…
This is a bottom brace to hold an inward facing self adhesive LED strip. You see the stuff being lit up but not the LED for the most part. The total length of the face that the LED mounts to is 615mm/ 24.2". Printed in Eryone matte black…
This is a Tricopter Y4 Drone that i have design. I will upload the M3 distance tube but i dont recommend to use them. I did just make them to show how the frame look like. Printer settings: Infill- 36% Grid pattern Perimeters- 4 Hight-…
This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.
The Display4top MIG130 Plus+ welding machine comes with no means of cable management.
This adapter is intended as a basis for other designs. It affixes to the 40V Ryboi leaf blower model RY40402VNM. Original idea for a duster nozzle required too sharp a taper to work properly, but figured the adapter part might be useful…
I wanted to install a Thunderbolt 4 expansion card, but the design of the Y40 restricts full height cards. Because I couldn't find a half height card from any manufacturer, I had to get creative. Using a 4x riser sourced from amazon (link…
Flyable prototype Y4 copter. Prints without supports. Still needs minor debugging. As far as flight, it's good to go. Will raise up camera in next revision. For now, FPV only with Diamond F4. LOS with any 1S whoop board. Category: DIY
Wanted to make a custom control plate to match my custom pickguard.
Lamax WatchY4 Play (children's smart watch) charging stand 2 parts: Charging board Stand You have to glue the stand to the board. Printer: Ender 3 V2 neo PLA Creality White 0,20mm Normal 15% infill, 3 perimeters Nabíjecí stojan na dětské…
Somehow the center piece of my bump head disappeared. I used two pictures I found to make a working version. Basic standard settings for printing. About a 45-minute print.
After my power switch lever broke, I crated a new model for it. This is version 2 since version 1 was not strong enough. I have added additional material to make sure it lasts longer. The power head was fairly easy to disassemble and then…
two different wall mounts for Sunton 7-inch Display from Andy40 / Thingiverse https://www.thingiverse.com/thing:5942782
Redukce na pero pro plottery Laboratorní pristroje XY4140/4150/4160. Jako pisátko se používá gelová náplň Pentel. vice info o plotteru . Tisk z PETG, ale i PLA nebo ASA, bez podpor.
Frame to convert the meteor 75 to a Y4 configuration.
This is a lens cover for the Magcubic HY450 GT version. (May work on the MAX version if the lens outer diameter is 72mm). The lens cover consists of two parts. THe inner thread ring. This ring fits snug around the lens and should stay in…
A swivel-pin adaptor and base mount for Raymarine Dragonfly series fishfinders, should fit both 4 and 5 series models since they use the same case, tested on my Dragonfly4. Provides a neater/smaller mount onto flat surfaces then the…
Magcubic HY450C projector protective cap
This is a custom, compact dust shoe for the Charly4U CNC machine to replace the stock dust shoe, which is quite bulky. You will need some support material for the otherwise unsupported inside of the duct. However, with good settings, this…
A quick Teensy4.0 Mount/clip/dogtag. I wanted a Flush mountable design, This is what i came up with. As with all my designs 'its not perfect but it works' Thinking of adding a front cover with button access, and might add a bit more…
Retrocam Y4000 Lens cap. The camera doesn't come with a lens cap so I made one. With a loop for a tether. Fits snug. Printed 0.15mm PETG on a Prusa MK3S
IMPORTANT UPDATE : there is a V2 of the spacer that provides way more stability (just make the bar 90 degrees off from those 2 posts just like the V1 version) it it prevents the blade from oscillating about the x-y plane over those little…
I wanted to play with the new ATtiny424 which happens to have a built in 32768hz oscillator. So decided to build a binary kitchen timer. I have some mini Christmas tree's (made with attiny10) and thought a building would go good with it.…
raspberry Pi case top vent for 40mm fan with clip fit , also has screw pockets for the board internally. should print without support (famous last words) PETG highly recomended
Enjoy!! As you like use it!!
Mounts for VESA 200 for 1x Raspberry Pi 4 and 2x Raspberry Pi 4 Improvement: Instead of "for 1x Raspberry Pi 4 and 2x R
bude pasovat i na jine chytre hodinky pro 16mm reminek pridana verze pro 20mm reminek
Da mir beim Korb die Griffblende abgebrochen ist, habe ich hier eine Blende erstellt.
This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.
Replacement fan for Ryobi RY40408VNM 40v Blower. Part # HM-537642001, Print with PETG-CF.
This is a small toy 4 cylinder turbo engine to help power your kids toys! It started as a fun little project to put a toy engine on my child's push car, as it had the perfect spot for one up front. I've expanded it a bit over the time,…
Replacement fan for Ryobi RY40408VNM 40v Blower. Part # HM-537642001, Print with PETG-CF.
Aquarium filter box for BY460 aquarium. Just add media and supply waterflow
https://awowtech.com/products/mini-pc-stick-ny41s-intel-j4105 I used a dovetail clamp to attach to the dovetail and secured the mount to the clamp using ¼" screws. Clampand dovetail bar:…
This is a mount for a Splitty4 Fan Splitter. The splitter had raised solder posts on the back, so I made little rails for the card to sit on, posts between the rails. It's set to use 2 M3x10 screws, washers and bolts to secure it. Print…
I designed and shared a lightweight print head mounter to fix V6Hotend, Sherpa-mini, 3010 Hotend Fan, 5015x2 Section Fan and Panasonic GX-H8A or B Probe for Kingroon KP3S. An X belt tension adjustment mechanism, X head position fine…
The original headband broke a few months ago (after years of usage), but the headset is otherwise still working. Rather than buying a new one, I designed this part using the live hinge technique. Print it flat on your bed at 100% Infill…
License: Attribution-NonCommercial-NoDerivs CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is…
The Allen wrench (hex key) for the 40v Ryobi pole saw, model RY40560 and head unit RY40051, does not have onboard storage. This was designed to clip on the saw head portion and keep the hex key close by the saw chain. Clipping it on is…
The Ryobi RY40104 40 Volt Lawn Mower has been discontinued and this particular part, number 58 from the schematic, is out of stock and will never be in stock. My first 3D printer just arrived, the Mini+. Why not have my first ever design…
Oriented on the side for printability. This one was made with Bambu PETG-CF. Just angle it right and it drops in place on the pc case.
This is a simple but effective lens cap for Xiaomi action cam (I have the yi 4k, but should work with all the Xiaomi action cameras). It should be printed with flexible material, it works great and it doesn't fall down. if you use a…
