29 modeli
I wanted to use my external monitor in portrait mode but couldn't because it has buttons on one side and and the USB-C cable goes in the other You probably want to print 3, 2 to balance the Arzopa + a spare
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Tilted stand to replicate laptop angle. Given weight distribution you will need to lean it against something (eg another monitor) or use double sided tape to stick them
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Studenti určí těžiště tuhého tělesa pomocí měření a výpočtu. Výsledky zaznamenají do pracovního listu.
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Transform your ultra-portable Arzopa Z1FC 16.1" 144Hz gaming monitor into a permanent workstation setup! This custom 3D-printed adapter adds standard VESA 100x100mm compatibility , letting you mount it on walls, arms, or stands for…
This adaptor can hold an Arzopa Q1 monitor in a VESA arm or stand. Designed to click in and out from the top, allowing its removal by pressing on the top notches. - Use M4 screws. Maximum 10mm, I used 8mm. - Printed with supports on the…
Remix of the mentioned model, but uses 50% of the filament and prints in a third of the time! Printed in PETG at .28mm layer heights with 2 wall loops and 20% gyroid infill. Print on the edge to have the best strength, I recommend to use…
Shorter version of the Q1 adapter by muitxer so that it now fits the Arzopa A1. All the same print settings apply. I split the model roughly halfway to print in two parts. HEADS-UP: I have seen some users report, that their A1 Gamut does…
Simple slide in Holder for Arzopa mobile Monitor to mount it on Vesa 75 or 100 Holders. For the Screws is used M4s, i included the step file so you can fit it for your needs. If possible print it standing, so you do not need supports and…
I made it for my wife and she is really happy with it. Its for the monitor ARZOPA A1 GAMUT SLIM
Screen support for a Arzopa portable 14" monitor. The magnetic support provided did not feel sturdy and I was experiencing a severe case of “got to make something” over the Christmas vacation. I wanted a design that could be printed…
These are some of the 3d printed additions I designed for my Arzopa S1 15.6 inch portable monitor. As the Arzopa S1 does not have any mounting holes so I designed a clamp, that attaches to it and which can be used to mount it to things.…
Print without Support fully in about 2:30h you need 4 M4 Nuts and 4x M4x16mm Screws for mounting, you can add longer screws to adjust the angle - then you only should extend the “abstandshalter”
VESA Adaptor for Arzopa A1 GAMUT Monitor
I designed a custom monitor mount for the Arzopa portable monitor, allowing easy attachment to the IKEA SKÅDIS modular pegboard system. This mount provides a secure and adjustable solution for integrating the monitor into a workspace…
I designed this to hold my arzopa monitor on top of my Lenovo Legion gaming laptop. I printed this on a Creality K1 Max at .20 layer height The model is 250mm tall I printed it on its end without support, having to do it over again i…
This monitor stand can be used to lay your monitor on your keyboard and have it supported
Stands in different fixed angles for a Arzopa Portable USB-C Display but it should fit many others. It should fit every display that is not thicker than 10mm.
Original design fit too tightly but I could fix it with a heatgun. Increased tolerances by 1 mm afterwards, but did not print the final version myself.
Print standing upright and glue two half's together. Do a less messy glue job then I did. ;-) Orca slicer fuzzy skin settings use 0.3/0.3
15.6 monitor holder, adjustable vertically and horizontally. An M4 screw and hot-melted inserts are required. The holder can also be used for various tablets and similar displays.
I didn't like the case/stand that came with the display and wanted to free up some desk space. I also travel with the screen so wanted to make something that didn't look to bad on the wall when the screen was removed. You will need 13…
Print standing upright and glue two half's and holder together. Do a less messy glue job then I did. ;-) Orca slicer fuzzy skin settings use 0.3/0.3 to attache to the multiboard you will need 2x…
Este é um remix de https://www.printables.com/model/848700-arzopa-s1-to-vesa-to-french-cleat-holder/files Aqui utilizei parafusos M3 25mm, por isso a necessidade de utilizar adaptadores (buchas) tanto para prender no suporte vesa quanto…
Replacement hinge for the Zopa Simply baby gate, because the original hinge breaks easily.
My wife need clip for bag. So I created easy clip for bag which fits for 39mm strap and fit for Zopa baby-carrier.
Tisk z ABS a 100% výplň.
Shorter version of the Q1 adapter by muitxer so that it now fits the Arzopa A1. All the same print settings apply. I split the model roughly halfway to print in two parts. HEADS-UP: I have seen some users report, that their A1 Gamut does…
