Modular Multilayer Rotary Storage Tower/Rack
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.40 – €0.49 net (excluding VAT)
For file: tower handle_0.4n_0.2mm_PLA_MINIIS_20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 19.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A customisable storage device which can have as many rotating layers as you require!
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 54
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
OVERVIEW
A customisable storage device which can have as many rotating layers as you require, simply print another layer and add it to the stack with the snap joint and voila!
The one I printed is at 50% scale as I didn't have enough filament for a full size but it still works and I have tested the snap joints at 100%.
I would love to see any makes so please post some pics, you get prusameters too!
PRINTING
Designed for 0.2mm layers but you can use 0.3mm to speed up the print if you fancy although if you do remember to drop the amount of horizontal layers otherwise time saving is negligible.
10% rectilinear for all parts except handle at 10% gyroid.
Make sure to select “support on build plate only” and use these perfect settings for tower top/tower layer/tower handle.
ASSEMBLY
Simply print as many layers as you wish and once you have removed the support material from the snap joint just assemble them ontop of each other and cap each end with the top/base. To attach the handle insert one of the ends into the top and carefully pull the other end until it pops over and into the hole.