1 / 2
10 Inch Server Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This setup is based on my current hardware and probably will not be applicable for your setup. The screws / t-nuts that i used are different type as well as these are the available parts that I have.
So I uploaded the step file for you to do some modification and probably improve the design to make it more standard and probably less hardware requirement.
Here are the parts I used.
- Aluminum Extrusion (2020)
- M5x16 BHCS - this is used for the blind joints for the extrusion (2020 size)
- M5x8 BHCS - this is the screws i used for the panel mounting (4 each per panel)
- M5 T-nuts - this is to secure the M5 screw panel from the extrusion
- M3x8 BHCS - top / bottom / back panel screws
- M3 T-nuts - used to secure the M3 screws.
All the STL's are printed on a 300x300 build plate and may not fit on a 256x256 (bambu) size bed.