1 / 1
H2T Solar Mod - Case of Heltec T114 with Solar Panel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add a tiny solar panel to keep the H2T battery topped up
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 115
- Makes
- 3
- Views
- 2,234
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Heltec T114 has both a battery input and a solar input:
Purchase list:
- Solar Panel: https://www.digikey.com/en/products/detail/anysolar-ltd/KXOB101K08TF-TR/13999136
- Connector: https://www.amazon.com/dp/B07FP2FCYC
- Some Kapton Tape (Optional): https://www.amazon.com/dp/B072Z92QZ2
Instructions:
- Solder Connector to the solar panel try to center the wires and be careful these wires are tiny!

- Add the solar panel shims and the Kapton Tape. Use the tape to keep the wires in the channel

- Place the battery in and route the wires. The wires I used was just barely long enough, so it will be tight. Make sure to connect the wires accordingly it is labeled on the PCB

Done! Some bright sunlight and everything should be great!
