DJI Phantom Drone LED Strobe holders
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.24 – €0.29 net (excluding VAT)
For file: DroneStrobeMountLegBottom.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 19.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a set of clips that let you mount Firehouse Technology 2-LED strobes to your DJI Phantom drone.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 436
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a set of clips that let you mount Firehouse Technology 2-LED strobes to your DJI Phantom drone. Works with P4, P4A, P4P, P4P+, and possibly others in the Phantom series.
There are 2 different clips, 1 for side facing and 1 for down facing. They mount on the landing gear arms (vertical or horizontal) and easily clip on and off. Notches in the clip allow access to the on/off switch and let the strobe LEDs show through.
Designed in OpenSCAD and printed in PLA. on MK3. No supports needed.