Prusa enclosure hexagonal feed-through for MMU3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The model was created to guide the 5 PTFE tubes through the hexagonal opening from the Prusa Enclosure to the MMU3
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 39
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
With the help of this two-part component, it is possible to guide the 5 PTFE pipes out of the back of the Prusa Enclosure. The hexagonal opening on the enclosure is used for this purpose. This means that the PFTE hoses only have a minimal radius, which has a positive effect on the filament guide. The holder for the tubing has an angle. This means that the PTFE tubes are not guided straight, but at an angle upwards directly to the buffer.
Supports are not needed.
In the current version, only PTFE tubes can be fed through. The model has no threads and therefore no tube adapters can be attached to it.