1 / 12
AWTRIX 8x32 WS2812B flex LED with ESP32
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LED Matrix frame for WS2812B and ESP32
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 139
- Makes
- 0
- Views
- 1,759
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used 2 pieces diffuser from old LCD monitor. Cut to 321x81mm. You will need diffuser frame (without screen) from original project. I made mounting bracket to fasten matrix led down and also used as mounting hole for back cover.
- Two piece frame must be print with support
- Back cover (with pins) should be print with support if you want texture design
You will need:
- 16x M3 square nuts
- 16x M3x10 screws (12x with stand)
- 4x M3x16 screws for 67.5° stand