1 / 9
Car Trash Bag Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slide on trash bag holder for car.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 43
- Makes
- 0
- Views
- 799
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hoop to keep a trash bag open.
There are three parts:
- A vertical piece that slides onto the edge of the opening in the side of the console (GMC Terrain).
- A hoop that snaps into the vertical part and holds a plastic trash bag. Use any small bag.
- Clips that keep the bag attached to the hoop.
- These are optional. I made 4 to spread around the hoop.
- They have a 3mm hole. I tied them all together with a piece of string so they wouldn’t get lost.
Printing
Prints with no support. I used ABS as it will live in a hot car.
Assembly
The hoop and the vertical part snap together. Either slide sideways or push straight in.
Usage
I found it easier to remove it from the car’s console to install the bag and clips, then attach the whole assembly to the car.