HX Stomp Backplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
Disclaimer: I ended up not printing it because I found a different solution to what I had planned. I attached the Fusion file with all the parameters so you can edit it to your needs.
I am certain the dimensions are correct. I would be worried about the stability using the same thickness bottom as the metal plate. I was considering adding some bracing of 1mm height on the inside. If you do so, do not go higher than 1mm. The plate is very close to the PCB components.
I definitely recommend PETG for this. The Stomp produces quite a bit of heat!
Feedback is appreciated.
My designs are released under a public domain license: You can do whatever you want with them. I put as much care and attention to detail into them as if they were commercial products. If my design solved a problem for you, I'd like to invite you to donate me a quarter of a filament spool. These little gestures go a long way and are quite motivating. Thank you!
