Counting matching models…
Hi! Because I got much more quality from my Sennheiser MKE600 than any other shoe mic - I've decided to upgrade my NX80 with the self made adapter. It should also work with other shotgun models, and for sure with all audio interface's…
YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…
Made this for my drink mixer project to weigh the content added to a glass. I have the autocad file if anyone needs any changes to the scale or bottom. And if you liked my project please consider just tipping me for the fun of it. Print…
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
5mm design update from the previous high-speed remix - RC2X Currently in use at GP surgeries around Portsmouth, UK and community keyworkers. We are producing about 100 a day on 4 printers Revision 1 • Modified width to be compatible with…
Designed for my Voron v0.1, I wanted to ensure the carbon filter fans where serviceable without having to open the electronics compartment. This snap-in mount holds a 2-pin JST-HX "socket" with a rear channel that allows the wires to…
I wanted a movement holder for my Seiko watch modding, which would sit steady when fitting hands and carrying out other work. The holder is designed to have a very small lip. making it suitable for placing movements in upside down with…
In addition to the adapter you need x2 M3 short brass inserts to be installed underneath so that you can use the original screws of the TM Micro Red Pro Sight to secure the red dot to the adapter (needless to say you need to remove the…
I liked revnull's idea to add a connector inside the chamber of the V0.1 so I decided to make fitment a little better and create a 3 pin version as well. There should be a slight friction fit with this print and I would still suggest…
Clamp to repair headphones that have split between the panel on the headband attached to the cup, and the slider. When you pull these headphones apart to put them on your head, especially if the sliders are slid down very much, it puts a…
Adapted and more holes placed in top plate to make room for a 4-pin header coming from the HX711 of the Smart Bed occupancy sensor by Lukáš Porubcan . Category: DIY
Printed vertically with the fan side facing down, with supports to support the part that mounts the shroud to the card. M3x10 screws used. First plug in the EPS to 2x PCIE cable then mount the shroud and screw it in using the 2 screws and…
Simple case for the HX 711 Board Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Resolution: 0,2 Infill: 20 Category: Electronics
Made a nice organic looking air intake to cool four Nvidia CMP 170HX PCIe cards with two high pressure 120mm fans. They move more air than 8x 40mm fans and are hell of a lot quieter. Also compatible with the A100 PCIe and potentially…
120mm fan duct for NVIDIA A100 / CHMP 170HX GPUs. It's not a very efficient design, but it's enough to cool a CMP 170HX with a 120mm Noctua industrial 3000RPM fan. .STL file is included Printing: Orientation: Large Flange on bed Material:…
I use it made of PLA, but may be TPU is better for reducing noises. Original spare part numbers: EAN: 4002516579250 Materialnumber: 10835083
Gridfinity-compatible organizer for the Park Tool HXS-1.2 Allen key set. Stackable design Module size: 2x6x3u
Line 6 HX Stomp Mini Tap Tempo with Expression Out Guitar Pedal: I made this pedal to clean up my HX Stomp setup. One jack connects to the HX Stomp Exp1/2 Jack with a stereo cable and the other jack connects to an expression pedal with a…
Développé sur : Bambu lab X1 carbon - ABS - hauteur de couche 0.2mm
Simple enclosure for HX711 load cells weight display module. I have several weight scales and i connect the module using 4 pole phone jack + cable. It contains also space for 18650 battery and charging circuit. Used parts : weight display…
THX Home Cinema Sign Made for BambuLab printer with AMS. Not sure if it works on other printers.
[Update March 26, 2020 - see note below] This was made for my build of the [clough42] Electronic Lead Screw project. Use with #4 x 3/8 sheet metal screws (#4 ~= 3mm). This is a simple frame to hold the TI-LaunchXL-F280049C for use on the…
I made this enclosure so I can build a bee hive scale with four HX711 load cells on each corner. It's made to be used outside and can be sealed with a fitting o-ring. Also it's supposed to be screwed to a top and bottom frame, so that the…
Filament holder with scale compatible with the Filler system. https://www.printables.com/de/model/174620-filler-filament-holder Built in is a load cell for 3kg with HX711 module. !!! The diameter of the filament roll must be larger than…
THX Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.: 17.5cm x 6cm x…
Board clips in. Uses M3 screws to secure it. No supports needed. Be careful sliding the board in so the front fingers don't hit the PCB components. If top side tabs are too tight, trim them with a knife or side cutters. It's for the…
New toothbrush, new mount needed. Counterbore is for #8 size tapping screw, but I'm sure many will fit.
This is a remix of thing:1118084 by Roy Edwards . This is a wall mount for Philips Sonicare HX6100 chargers . It's intended to be mounted to a wall or tiles using double-sided tape such as 3M VHB and resembles a Feller light switch to…
Camera Mount is 35mm from center to center. Solar Mount is 47mm from hole to hole in a 3-hole pattern. Material Used: Atomic Filament ASA CF Hardware Required: SS M4X10 Socket Head Cap Screws - Quantity 3 (Solar Mount) SS M4X12 Flat Head…
Simple Phone Stand for the Gigaset CL660HX in 2 different Styles.
This is a scale case for a 5kg scale Module and the HX711 pcb. It can be connected to a RaspberryPI and used by the Octoprint Plugin “Filament Scale Enhanced” ( https://plugins.octoprint.org/plugins/filament_scale/ ) The filament spool…
If you own a THX Ultra 2 Homecinema or at least equipment, tell it with a Door sign! ;) Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution: 0.2 Infill: 30% Filament: JANBEX PLA black / white (or GOLD) Notes: Very…
I designed this based on the "Mini Track Loader RC" from Zedpi. You can use the lego chain and all the other parts from Zedpi's design ( https://www.thingiverse.com/thing:1000713 ). So it is only slightly larger as the original one from…
Test bracket for HX711 bar-type weight sensor.
Le design est compact, solide, et parfaitement adapté aux fans de l’anime culte. Je crée chaque mois des packs complets (logos, dioramas, versions murales, multi-couleurs). 👉 Disponible ici : https://patreon.com/Retro3D Caractéristiques :…
HX711 load cell display module box with battery and charging module. Assembly Notes/etc: The cover interferes with the charging board, just cut the lip away where it touches. It was easier to modify than measure and place in CAD for a one…
I printed Gomiappuroda's blower adapter (https://www.thingiverse.com/thing:6773548), with the end chopped off when slicing to save space, then used this piece to mount the blower next to the card so it fits in my case. Two versions, one…
I wanted a way to mount the Minisforum HX90 under my desk instead of having it sit on top. There are two M4x8mm socket cap screws screwed into inserts on the HX90. The computer is hanging with some short #12 screws. Printed using a .6mm…
Canopy for the famous betaFPV HX115 HD It is made to mount a pandaRC vt5804_AIR in it. I added a Lumenier Micro AXII Shorty to it as well :-) You need some support to print it. I made mine from TPU. Happy printing and flying ;-)
This Gotek drive case is designed specifically for computers which use the larger 1.25” tall 3.5" Floppy Drive form factor. I've designed it to use a 128x64 0.96' OLED and Rotary Encoder with Push-button. You can also add a little speaker…
I'll need a touch protection for the electronic component nearby a load cell. On picture 2 you can see this was made for the pcb with the red frame. But this pcb didn't work for my project. So I used the other one. If you have the same…
I made this to house my HX711 boards along with my breadboard. Uploading in case somebody else finds it useful! Everything uses M2 screws and the center fits a 2.54mm pitch breadboard with 7x8 holes. There are indentations on the back…
This case was designed specifically for mounting a Minisforum HX99G to a monitor. I use it to keep my computer close to where I use it, but this mount keeps it out of the way, and if you use it the way I do then it acts as a monitor…
This is a custom blower cooler design for the Nvidia CMP 170HX that replaces the original shroud. It is approximately 305mm long. It has satisfactory cooling performance, while having a more traditional integrated form factor compared to…
I love my Drop THX Panda headphones but the headband hinge that allows the cups to swivel has always been a weak point. Lately it has almost completely broken, allowing the right cup to tilt and swivel past its stops. They still work…
Description: Build your own connected smart scale with this 3D printable enclosure! This design provides a robust and clean housing for the essential electronics, allowing you to create a WiFi-enabled scale that can send weight data to…
Replacement cover for the Tandy 1000HX and matching slot blank
Fox DHX2 Mountain Bike rear shock (NOT MADE TO SCALE) Created using Fusion 360 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 10 Category: Sport & Outdoors
This is a custom 3D-printed stand designed specifically for the Minisforum HX99G mini computer. Unlike the original stand, which mounts from the back, this model is secured from the bottom using two screws. The design provides a stable…
The Top and Bottom Lens Covers for the Einscan HX scanner are protective accessories designed to prevent the scanner's lens from becoming scratched or damaged. These covers are placed over the top and bottom of the scanner's lens to…
Adapter for the DJI FPV Cam for installation to Elegant 5 with full funktionality.
A simple component you can use to represent a straight JST-HX 2-way socket with a plug inserted for use when designing cases etc. Not suitable for printing. The STEP file can be uploaded then imported into Fusion 360 for use in your…
Simple enclosure for basic HX711 ADC modules, specifically the ones linked below. The lid won't fit with the included header pins so to use it you will need to use right-angle header pins or solder the wires directly to the board. I…
I wanted to attach my camera strap. Several restarts and revisions later… Does block battery and SD card, but you can still charge over USB. Can add hex nut to maintain tripod functionality. Use at your own risk. I make no promises about…
Because the lipo is on the underside, sometimes it's hard to get the quad sitting flat on it's starting place. These feets should help :-) The weight of 4 feets is less than 8 grams The light ones are around 4 grams. Not the easiest thing…
This is a custom mount designed to attach a Philips Hue Play Lightbar to a Samsung 49 inch curved wide-screen display . Specifically the QLED Gaming Monitor C49RG94SSU (49") attached to a Ergotron HX Montior Arm . The mount is simply…
Belt clip for Gigaset phones. I only have a C575 HX, but it may work on other Gigaset phones. If it works for you on another model, please comment so I can add it to the list. Attaches to the phone without glue. The clip itself feels a…
This vise clamp is designed with a diameter of 1.315", or just about perfect to hold the rezi for service. If you need this you know what it is, so I wont explain too much. There's a slot for a 12x2mm magnet if you wish to add one. Print…
I saw this tiny 1g gps antenna and decided one needed to go onto a micro toothpick. I built out a betafpv hx115 LR using the Darwin FPV f411 with ELRS and a 18650 battery.
Brush holder for Miele HX vacuum cleaner
Sci Fi Movies - THX 1138 - 1971 3D printable model.
Single Fibre Optic Cassettes (FHX) holder. Fits the FHX Casettes from fs.com ( https://www.fs.com/de-en/c/fiber-optic-cassettes-2961 ). Has 4 screw holes to mount it to the wall or under a table. Print instructions Licence: Creative…
HxH tessera licenza Hunter ( no AMS)
Remix of the LaunchXL Enclosure by millibyte for the TI LaunchXL CC1352P-2 (longer than original because of PCB-Antenna and SMA-Socket) Changed some details to make it fit M3 Screws from the bottom and added the Zigbee 2 MQTT Logo :) Hope…
3.5" drive bay bracket for HX-118 IDE to CF adapter
BetaFPV HX115 LR TPU set. I've beefed up the camera/antenna mount, added a gps and Runcam thumb mount for the craft. You will need an m2 screw and nut for the Runcam mount. GPS is mount was made for the HGLRC M80 which is 18.5 mm x 18.5mm…
Mount the HX-916 coin acceptor (and similar) for temporary programming, with easy access to the device's built-in buttons and LEDs. Create a new mount for the device using the matter subtraction model. I printed using PLA. I purchased one…
The 3D preview on this site shows the negative objects as part of the model, but don’t worry — the model is designed correctly 😄 The preview here is very approximate. I also added a screenshot showing how it looks after slicing/rendering…
Disclaimer: I ended up not printing it because I found a different solution to what I had planned. I attached the Fusion file with all the parameters so you can edit it to your needs. I am certain the dimensions are correct. I would be…
https://github.com/dkpoulsen/170hx-fanduct
Flush mount I use for my FliteTest airplanes. The servo slides in very tight. the cover just holds in in place. It fits HXT900 and SG90 servos. MG90's should also fit but have not tested. The V1 I have used twice but the cover does not…
Latch of a friends cuckoo CHXB1010FS ricecooker broke off. Due to the covid-19 situation at the time they could not provide replacement parts. We created this replacement latch. There is one file for the complete latch and two for a…
This clip fits the Standard Horizon HX870 Marine Radio and should fit radios with a similar clip mechanism.
This is the 3D model for a PCB I designed to connect a D1 Mini and an HX711 together with 4 load cells to create a scale or occupancy sensor. Case is designed to use a single m4x10 bolt and m4 nut. There are no traces that go to the hole…
I use an Ergotron HX Dual Arm to mount 2 large LG monitors. This adapter allows you to mount the Intel NUC out of sight, behind the monitors. A normal VESA extension plate will not work in this case, since the LG displays have recessed…
Best printed with Snug Support Auto in upright direction. Sides act as spring clips, might get different performance in different materials. Print shown is with PETG-CF. Works perfect.
There is a recess on the bottom for 3M rubber feet (8-9mm diameter) on the bottom to keep it from sliding around on a desk.
I replaced the 10s1p accu into a 10s2p LI-ION battery. This bracket holds it in a stabile position. suitable for modell bluewheel HX310S. And maybe for some other types ;-)
Philips sonicare charger HX6100 Skadis toothbrush hanger Printed with normal auto generated supports (don't try tree support trust me) 75% gyroid infill, 6 wall loops, printed using outer brim but im not sure its necessary fits every…
Hello everyone, This is my first project for a toolhead for the Sapphire SP5 V3. It's currently in the testing phase and supports the following components: 1 x Btt Eddy Duo - Link 1 x Trianglelabs CHC V6 HD 24V - Link 1 x Sunon Fan…
Simply a Crevice Nozzle for your Miele Triflex vacuum. I suggest printing it with nozzle down, to make sure to have a clean and flat surface in the end where dust is collected, it will print just fine that way.
Vis à main pour le support de toupie
Stand für Olight ithx + i1r2 EOS Hexagon Halter für Olights. Alle Größen sind untereinander kombinierbar. Entweder einzeln stellen oder alle zusammen stecken, nach Lust und Laune. Weitere Modelle: i1R2 PRO:…
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
44- hisoka 99- Killua 301- Illumi 403- Leorio 404- Kurapika 405- Gon
A simple component you can use to represent a right angle JST-HX 2-way socket with a plug inserted for use when designing cases etc. Not suitable for printing. The STEP file can be uploaded then imported into Fusion 360 for use in your…
Got myself a super handy Coast HX4 clip light to prevent my helmet lamp from burning everyone's eyes out while I'm looking at my notepad. But since the button is protruding, it constantly gets pushed while the light is in my pocket,…
You may need to clean out any stringing on the inside, bullet connectors should snap into place slightly. If the connector won't go in, heating it up and gently pressing with a soldering iron can work to soften the plastic. I used hot…
Control Horn cache for the Widl (Yellow, Black), Flidl (Yellow, Red) and Midl (White, Red) versions for HXT900 servos Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Infill: 100%…
Halter für FLEX-DOT-Schraubendreher von PROXXON - HX-Ball Kugelkopf-Schraubendreher Ich habe die ganze Kollektion der FLEX-DOT-Schraubendreher von PROXXON. Leider habe ich keine Halter dafür gefunden die mir gefallen haben, um sie an…
Once I stumbled upon Revnull's original mount, I knew I wanted to adapt it to support dual JST-XH connectors for both a chamber heater and fan.
A cover for the wires of a HX711 load cell based set of scales used as a keg scale for Cornelius kegs and mini-kegs. This is inspired by the instructables post https://www.instructables.com/Beer-Keg-Scales/ The hx711 and related circuit…
Použil jsem držák váhy s těchto stránek a upravil jsem ho pro držáky Endr a podobné. Duležité: podívejte se jaký typ siloměru požívám, díra - M4 , rozdíl bývá dírách je buď M4-M5, pokud máte siloměr s dírou M5 použité držák pro siloměr ze…
Enclosure for Scale up to 10kg with Arduino and HX-711 Weightcell. For Project Details, Wiring and Code see: HX 711 basierte Waage Elektor Sparkfun I had 2 Metalcovers from an old PC or Server laying around and used them as Base and…
UPDATE: Added longer version of Z probe for longer hot ends. This replacement X carriage bracket and switch arm allow you to mount a servo-actuated Z probe to your MakerFarm Prusa i3v printer. The Z probe serves two purposes: it registers…
I created this to support 3kg spool but the platform can be adapted to any other content.
A small 3D‑printable enclosure designed to fit an HX711 module with JST connectors.
wallmount for TP-LINK Aginet HX510
Printed on Bambulab X1C, 0.20 Standard PLA profile, without brim, without supports
I created this mount because I couldn't find another suitable mount for my water rower. The design is flexible, other inserts can be designed and inserted in the base. I am using the iPad on top to watch a movie or TV show and an iphone…
![WOODWERD Anker 200W GaN [HX-P16] Mount](https://media.printables.com/media/prints/1147979/images/8665702_a8c10981-5dcb-4acb-8a3f-7a6345d911ab_5859d0ee-8d2a-4e69-877d-eb72f9e63193/anker200wgan_asm-v3.png)
