80mm Blower Cooler for 170HX/A100
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom blower cooler design for the Nvidia CMP 170HX, replacing the original shroud.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 72
- Makes
- 0
- Views
- 650
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom blower cooler design for the Nvidia CMP 170HX that replaces the original shroud. It is approximately 305mm long. It has satisfactory cooling performance, while having a more traditional integrated form factor compared to other solutions that allows it to fit in any space where a traditional 2-slot GPU can fit.
Thermals@300w, 5300RPM:
Core Temp(avg/max): 71c/73c
HBM Temp(avg/max): 72c/74c
Thermals@250w, 2950RPM:
Core Temp(avg/max): 76c/81c
HBM Temp(avg/max): 77c/82c
BOM:
9 of the torx screws that secure the 2 halves of the original shroud
Champion CF8038U12D Fan("4090 Blower") and the 3 mounting screws(should come included with the fan)
1x Shroud(Printed)
1x Backplate(Printed)
3x NVLink Seal(Printed) if using backplate with NVLink cutouts
Recommended Print Materials:
ABS/PC is heavily recommended, though PETG may work in a pinch. PLA is heavily unadvised.
Print volume requirements:
If you want to print the backplate and shroud flat you will need a 270mm by 270mm bed. However, if you tilt the models 45 degrees upwards, they should print on a standard (256mm)^3 printer.