Counting matching models…
Printed vertically with the fan side facing down, with supports to support the part that mounts the shroud to the card. M3x10 screws used. First plug in the EPS to 2x PCIE cable then mount the shroud and screw it in using the 2 screws and…
Made a nice organic looking air intake to cool four Nvidia CMP 170HX PCIe cards with two high pressure 120mm fans. They move more air than 8x 40mm fans and are hell of a lot quieter. Also compatible with the A100 PCIe and potentially…
120mm fan duct for NVIDIA A100 / CHMP 170HX GPUs. It's not a very efficient design, but it's enough to cool a CMP 170HX with a 120mm Noctua industrial 3000RPM fan. .STL file is included Printing: Orientation: Large Flange on bed Material:…
I printed Gomiappuroda's blower adapter (https://www.thingiverse.com/thing:6773548), with the end chopped off when slicing to save space, then used this piece to mount the blower next to the card so it fits in my case. Two versions, one…
This is a custom blower cooler design for the Nvidia CMP 170HX that replaces the original shroud. It is approximately 305mm long. It has satisfactory cooling performance, while having a more traditional integrated form factor compared to…
https://github.com/dkpoulsen/170hx-fanduct
PLA friction fit CMP 170HX adapter for a 9733 BFB1012VH-F00 centrifugal fan with a 58mm width, 34mm height, and 10mm depth outlet dimension with no screw retention security because I have no screws. Made with 100% ignorance and 0% 3d…
The CMP 170HX has a bunch of fins at the front that seem to serve basically no purpose(except mayber to stop you from sticking your fingers inside the shroud). The glued in fins were an obstruction for a cooling idea I had, so I made this…
