1 / 10
Internal Gotek Drive Chassis for Tandy 1000 HX or Amiga 2000 — image 1
1 / 10

Internal Gotek Drive Chassis for Tandy 1000 HX or Amiga 2000

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed for a 128x64 0.96' OLED and Rotary Encoder with push-button to fit the less common 1.25” tall drive bays

Rating
0 / 5
Likes
4
Downloads
72
Makes
0
Views
598
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

This Gotek drive case is designed specifically for computers which use the larger 1.25” tall 3.5" Floppy Drive form factor.

I've designed it to use a 128x64 0.96' OLED and Rotary Encoder with Push-button. You can also add a little speaker if you like.

Required Parts:

 

NOTES:

  • As per the picture, you need to remove the little nub on the top of the Rotary Encoder case for it to sit flat - I just used side cutters.
  • The OLED display sits in-between the two vertical rails and is fixed in place with some hot-glue. It should sit perfectly on the bottom of the case, providing perfect vertical alignment. 
  • CAD file has been provided for remixing.

Updates: 

  • I found a “Bone White” filament from CC3D that is a slightly better colour match. It's got a slight greenish hue, but is much less bright than the warm whites I've tried previously. See the last picture for a comparison with eSun Warm White. 
  • Another option that might be even better is Overture Matte Beige PLA.
  • I've been advised the there is now “Retro Platinum PLA” from Polar Filament available that might also be a good match.

Tags