65mm Prop Toothpick Frame 100% 3D Printed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a toothpick quad with 8.5mm motors and 65mm props.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 39
- Makes
- 0
- Views
- 580
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a toothpick quad with 8.5mm motors and 65mm props. Its made to house a whoop-sized FC (26 x 26mm).
The battery holder needs to be mounted with the opening towards the back so you can access the USB port. I installed a BeeBrain V2 that I had lying around. I made my own connector out of balance plugs but they only have 2 pins (solid pins) which result in less voltage sag. I am using a 600 mAh battery with my custom plug mod to get around 3:30 - 4:00 min of flight time with plenty of power.
Parts:
BeeBrain V2: https://tinyurl.com/2p8zjb37
Props: https://tinyurl.com/3nuec3nb
8.5mm Motors: https://tinyurl.com/2p8mf44e
Battery Connector Plugs: https://tinyurl.com/yuhhj469
Battery: 40c minimum