Passthrough lid for a power cord with side entry
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Passthrough lid for a power cord
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A pass-through cap that allows you to pass an EU power cable neatly through an 18mm panel, such as the wall in Ikea cabinets. The difference to many other passthrough mechanisms is that the cable exits from the side. This allows for easy and flat cable routing.
The outer diameter of the neck is 60mm, and the hole I used was done with a 63mm saw. You should be able to scale the model up/down, based on the saw size.
The cap has a groove through which the cable will be initially inserted. Once the cable is in place, the filler will close the slot, and the filler will stay in place once you screw the back cap in.