1 / 3
Fiber Glass Threaded Pole To Pinned Tree Pruner Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to allow the pruners hollowed pinned interface mate with the threaded interface of the extension pole.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I made an adapter to allow me to use the two products I posted. The tree pruner and the aluminum extension pole. I believe the pruner was intended to be put on a wooden pole but felt an extending pole would be better.
You'll have to add the hole your self. You can either measure and add the hole in the slicer or simply drill into the model.
For this model the center of the hole should be placed 28 mm from the bottom and the hole should be 4.5mm wide.