Guitar Hero Live controller battery cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery cover for a Guitar Hero Live controller.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 130
- Makes
- 0
- Views
- 472
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Tight and loose variants available. I recommend the tight one, at least for PLA, it'll take a bit of pressure to get on first try but it should get looser after that, but I'm still publishing the looser one if you want that.
I printed it flat on the bed to get a nice outer surface, but it'll make the latch a bit fragile, so you gotta be a bit careful with it. If you do so, I recommend enabling manual supports and painting in only the areas highlighted in green, and enabling the following settings (this is for OrcaSlicer/BambuStudio, might be slightly different for Cura/PrusaSlicer):
- Support type - Normal (manual)
- Support style - Snug
- First layer expansion - 0mm
You should probably print it vertically with the short side facing the bed if you want it to last longer, though.
I also added Fusion 360 source files if you want to adjust the tolerances to your printer or material choice, the main things to edit are the latch and catch sketches.
If this model was useful to you, you can support me at ko-fi.com/lexd0g. Thank you!