1 / 2
Antriebswellen verbesserung für Axial SCX 10 III / drive shaft improvement for Axial SCX 10 III — image 1
1 / 2

Antriebswellen verbesserung für Axial SCX 10 III / drive shaft improvement for Axial SCX 10 III

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DE: Antriebswellen Verbesserung für das Axial SCX10 3 Chassis. EN: driveshaft improvement for the Axial SCX10 3 chassis.

Rating
5 / 5
Likes
12
Downloads
104
Makes
0
Views
1,024
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

DE Beschreibung:

 

Passend für das Axial SCX 10 III Chassis. Eine verbesserung für die AXI232017 Wild Boar Antriebswellen. Das Mittelstück wurde so lang wie möglich gemacht um die Kraftübertragung zu verbessern. Die Antriebswellen sind im Slicer leicht auf die richtige länge änderbar falls man eine anderen Radstand benutzt. Die zwei hälften müssen nicht unbedingt zusammengeklebt werden.

Das Bauteil ist teilweise sehr filigran und muss gegebenenfalls noch nachbearbeitet werden. Stelle sicher das dein Drucker gut eingestellt und kalibriert ist.

 

EN Description:

 

Fitting for the Axial SCX 10 III chassis. An improvement for the AXI232017 Wild Boar drive shafts. The middle part has been made as long as possible to increase power transfer. The drive shafts can easily be edited the correct length in the slicer if you use a different wheelbase.
It's not necessarily to glue the two halves together.

The component is partially very thin and mayby need some post processing. Make sure that your printer is well tuned and calibrated. 

 

Druckeinstellungen/print settings:

 

Düse/Nozzel: 0.4mm

Schichthöhe/layer height: 0.1mm

obere und unterer Schichten/top and bottom layers: 8 layers

Wandlinien/parameters: 0.4mm = 4 Walls

Füllung/infill: 30% Triangle

Stützstruktur/supports: keine/none

Material: PCTG, PETG, Nylon, ASA

Tags