Brembo brake lever pivot sleeve tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This tool replaces the Triumph T3880636 tool. It will probably work with most of Brembo brake lever (radial master cyl.)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
This tool allows to disassemble and assemble Brembo brake levers with a press fitted pivot sleeve (12 mm outer diameter).
I was not ready to use a hammer on those shiny levers :) , so I designed a simpler version of the Triumph T3880636 tool.
You will need a 4mm threaded rod or a press to apply pressure.
It will probably work with most of Brembo radial master cylinders (KTM, Yamaha, Triumph,… ).
I used it for my Triumph Speed Twin 1200. As far as I remember my previous KTM 990 SuperDuke has the same type of brake lever.
It will work on : Thruxton 1200 R, Thruxton RS, Speed Triple S, Speed Triple R,
Street Triple R from VIN 793032 up to VIN 982752, Scrambler 1200 XC, Scrambler 1200 XE from VIN BP0885, Scrambler 1200 X, Speed Twin, Speed Twin 1200 up to VIN CA0786