Parametric Drawer Knob
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.43 net (excluding VAT)
For file: Door_Knob_25mm_0.4n_0.2mm_PLA_MINIIS_26m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 26.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fully parametric drawer knob for cabinets and drawers of all kinds – customizable in Fusion 360.
- Rating
- 4.667 / 5
- Likes
- 14
- Downloads
- 123
- Makes
- 3
- Views
- 374
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric Drawer Knob
🛠 Fully parametric drawer knob for cabinets and drawers of all kinds – customizable in Fusion 360.
🧩 Introduction:
My wife wanted new drawer knobs in different sizes for various pieces of furniture – so I created this parametric drawer knob in Fusion 360 to make it easily adaptable.
You can download two ready-to-print versions in 25 mm and 35 mm as STL files, plus the original Fusion 360 file where all dimensions can be customized via parameters.
The 25 mm version works well for e.g. the IKEA Kallax shelf
The 30–35 mm versions are great for IKEA PAX drawers
Looking for something playful?
🎈 Check out my other model: Drawer Knob – Cloud – designed for my future son’s wardrobe!
📐 Fusion 360 Parameters:
Height – Total height of the knob
Top – Diameter of the top side
Bottom – Diameter at the base
Middle – Diameter at the narrowest point
Height_Middle – Distance from middle to base
Fillet – Fillet radius at the bottom edge
🔧 Hardware:
The knob has a built-in M4 thread, so you can screw an M4x25 screw directly into it.
This size should fit most common drawers and cabinet doors.
🖨 Print Settings (Recommended):
Material: PLA / PETG / ABS
Wall Perimeters: 2–4
Infill: 25% (Cubic recommended)
Supports: Not required
Custom knobs made easy – print the size you need or adjust the parameters and create your own version in seconds!
Feel free to leave a like or post a make if you find it useful 😊