Pixel 9 Pro Fold - Pixel Stand 2 Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A properly sized Pixel Stand 2 riser for the Pixel 9 Pro Fold. Friction-fit, no adhesive required for mounting.
- Rating
- 4.667 / 5
- Likes
- 21
- Downloads
- 199
- Makes
- 1
- Views
- 995
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Pixel 9 Pro Fold's wireless charging coil is too low to properly align and charge on the Pixel Stand 2.
This riser's height is based on multiple measurements of the internals of the PS2, and a calibrated reference photo (provided by Google) of the P9PF's charging coil location.
To attach the riser, simply “hook” it into the spaces between the base and the front face of the PS2. Make sure to push it all the way back, then down against the base.
__________________________________________________________________________________________________________________
Printing
Rigid material, at least for the hook-section (ASA, PLA, PETG…)
0.25mm layer height (or lower)
0.15mm layer height for the first 3.4mm (to give enough detail to the hooks)
≥15% infill
Supports optional (with strong enough cooling for the hooks)