1 / 5
Salt Shaker Lids
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made replacement lids for a couple salt shakers that were missing
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Print in any rigid material, I used PLA. No support is needed.
You can generate lids for most any shaker if you used Fusion 360 and modify the Outside_Diameter parameter (SOLID toolbar section >> MODIFY >> Change Parameters), with the measurement of “A” (see diagram). Unusual threads may require other parameters but most only require “A”.
