1 / 4
D3S Xenon Dis-/Assembly Aid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
small gadget to support diy exchange of xenon burners in tight spaces for use with wrench NW13 for leverage
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I made this little helper because due to very little space behind the Skoda Superb driver side headlight I could not apply enough torque to the socket of the lamp to release it from the holder.
I used a 13mm open-end wrench but would actually recommend to use a ratchet with small extension.
Not much force is needed, but if you can not really grab it, this is the way to go. Be gentle with the parts.
Printed in PETG CF with Bambu Studio 0.2mm Strength preset and PLA support hack for the overhang.