Counting matching models…
Summary This is a model of a Mazda RX7 (FD3S) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of integrated connectors. The…
As the FD RX-7 gets older it can be difficult to find new replacement parts for the interior. One such part is the A-pillar trim, which is currently still available but may be discontinued in the future. Code Red Performance have been…
This model was originally made by TsiaOne and full credit goes to them for making this model, I just made some slight tweaks so that it can just be dropped in without any fuss and only super light sanding depending on the situation. Make…
This is a printable 3d scan of the passenger side interior door handle pull. It is a bolt in replacement for the OEM handle which is very prone to failure. The one pictured was printed in PLA, but I highly recommend ABS, PETG, or ASA for…
Made to for my rx7 dash. Printed in abs, face down, to get the texture of the PEI bed that almost matches OE Mazda texture. Included STL and F3d files for modification. There is also a groove in the bottom to allow for a strand of 1.75…
Who isn't missing a cowl screw cover at this point? After years of sitting exposed to the elements the OEM plastic cowl screw covers weaken to the point of being extremely brittle causing them to just disintegrate by looking at them.…
Here are models to replace your broken seat belt retainers. You'll still need the metal push nuts and spring from your broken retainers. If you do not have the push nuts you can get these: https://www.mcmaster.com/94813A200/
Whether its from years of sitting in the sun, repetitive removal, or just getting lost. Chances are that you will need to replace the door handle screw covers. This part is a replacement for the door screw cover located inside the driver…
Whether its from years of sitting in the sun, repetitive removal, or just getting lost. Chances are that you will need to replace the passenger door screw cover. This part is a replacement for the door screw cover located under the…
This is an adapter used to adapt the upper intake manifold on the 20B and 13B engines to a GM 90mm throttle body. I've test fit this on the 20B and REW intakes, but should also fit S4 and S5 intake manifolds.
These scans can replace the stock interior door card defrost vents on either door, that are subject to cracking and breaking over the years. This part is impossible to find nowadays. Thanks to Seven!!…
Replacement privacy cover hooks for the Mazda FD3S RX-7. These are the hooks that attach to the rear strut tower bar. They use three #6 x 8/8 Phillips Truss Head screws to attach to the strut tower bar. No supports are needed and I…
Highly recommend using this instead: https://www.printables.com/model/1184266-fd3s-map-pocket-lid as Watch_ME completed the model. 99% finished model with .STEP file in case anybody wants to edit it - I stupidly broke the hinge area of my…
Upgrade your Mazda RX7 with our brand new FD RX7 Strut Tower Brace Guard, designed to offer protection and enhance the longevity of your vehicle. Engineered for FD3S Mazda RX7, this essential accessory is a must-have for maintaining the…
This bracket allows you to mount a RX8 DBW pedal into the FD3s RX7 chassis without modification to the chassis or pedal. Should be pretty easy to print, and I would suggest doing it in ABS or PETG only and use a heavy infill. You'll want…
After a lot of trial and error, I was able to get a finished product that I was very happy with. It takes cutting the piece in half with a dovetail IN THE SLICER and then angling each piece in the slicer to get cleaner layer lines so you…
If you own a FD RX-7 you know the frustration when you break any of the plastic interior pieces, especially now that more and more are being discontinued. That was the case for me. I accidentally broke one of the plastic retaining clips…
replacement mounting brackets for the drivers side armrest/map pocket plastic. I have included several variations. There are stock ones for direct replacement if your foam is in good shape. there are also reinforced brackets that have…
This is a replacement cover for the manual headlight adjuster knob. The “stock” cover is a copy of the OEM part and would work very will printed form TPU or other semi-flexible material. The “024 oring” model uses a 024 oring to secure…
This is a direct copy from my clip from the middle of the two defrost vents, request on Facebook RX7 group. Made in Fusion 360. v2 has beefed up triangles to help the clips Untested on car
It is crazy how after 25+ years the small OEM plastic parts manage to grow legs and walk away somehow. Thankfully you can now get a replacement for the sunroof screw cover. As with all of the Code Red Performance products this replacement…
A model to design things around the door plastic, and have fun with
This is my modifications and take on the 3D printable cupholder. I modified the file found on thingiverse below. This is a work in progress. I plan to make simple fill armrest style as well as further modify the “plug” piece I have…
This is a community upload of an replica 3D model of an air duct, shared for restoration and fitment reference. Compatibility Mazda RX-7 (1999-2002) — please verify your exact variant before printing (mount points/geometry may vary).…
Rx7 1993 (FD3S) Trunk lid cover clip
Be sure to download the version you need, whether that's LHD or RHD
Made from the original part from the Rx7 FD ( #FD S6B14/5 ). You can now 3d print this piece with the gasket , The gas filler neck bezel is made specifically for the Mazda RX-7 FD3S. It functions as a protective insert around the fuel…
As the title says really, these are the inner clips that go along the window trim. Printed, tested, they work. Included .step file in case you can spot any improvements. Please excuse the poor quality print in the pictures, was ripping…
First and foremost, under no circumstances do I suggest you 3D print this part from plastic and use on your engine! I've provided this model as a mock-up tool only. Use at your own discretion. On that note, I've also included a .DXF file…
Fairly simple model so haven't bothered uploading the .step files Printed in PETG, cleaned up the old damaged area and used JB weld to hold them in place. Print sideways for strength with a little support underneath, obviously appearances…
3d print for the rectangular bung at the back of the sills of the RX7 FD, one of the first prints I designed from scratch and used.
My glove box hinge mount broke, here is a replacement part that can be epoxied in place. There must be some of the original tab left to mount this to. In the above photo part of the original tab sits behind the printed part. The stand…
A simple internally baffled filler neck with a -10 ORB thread in the front to run to your catch can. If you want to try and 3d print this, I have provided a file with the threads modeled so that can happen. But I HIGHLY recommend sending…
The legend lives in your pocket. This minimalist keychain is a tribute to the iconic Mazda RX-7 FD3S — the rotary-powered beast that tore up touge roads and stole the spotlight in drift scenes and anime alike. Featuring a sleek silhouette…
FD01-51-261A rear license plate bracket/holder. Can provide STEP if anyone needs - but not sure it'd be much use. This fits. Printed in ASA, 5 walls.
I made this little helper because due to very little space behind the Skoda Superb driver side headlight I could not apply enough torque to the socket of the lamp to release it from the holder. I used a 13mm open-end wrench but would…
small dowel that replaces the broken or missing piece on your sun visor that allows it to clip in place
I made this little helper because due to very little space behind the Skoda Superb driver side headlight I could not apply enough torque to the socket of the lamp to release it from the holder. I used a 13mm open-end wrench but would…
How good is the model? Please have a look here ! (4.8 stars @ 4+ ratings) Summary This is a model of a Mazda RX7 (FD3S) in a kit card style. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…
This is the headlight cover of Rx7 FD3S (Part no: FDY2-51-SH1 & FDY2-51-SH2 ). The OEM part as a tendency to crack so why not 3d print it! It can be print in one piece if you have a large enough 3d printer or in 4 different pieces with…
![[FD3S RX7] Center Speaker Gauge Pod](https://media.printables.com/media/prints/354347/images/3007193_43e9a528-0357-44c1-84fe-2a0c7f772cd8/4.png)
![[FD3S RX7] Cowl Screw Cover Kit](https://media.printables.com/media/prints/157372/images/1471043_15347923-995d-4e03-9c0d-e858aa57b193/large_display_largeclip_crp_157372.png)
![[FD3S RX7] Door Handle Screw Cover](https://media.printables.com/media/prints/157374/images/1471054_ba75065f-7c99-4e69-a38c-f9ebb6f8f768/large_display_doorhandlescrewcover_crp_157374.png)
![[FD3S RX7] Passenger Door Screw Cover](https://media.printables.com/media/prints/157375/images/1471057_5e690c1a-397f-4038-9c33-2849f5840b6c/large_display_doorscrewcover_crp_157375.png)
![[FD3S RX7] Privacy Cover Hook](https://media.printables.com/media/prints/275347/images/2446022_39d00fd4-ae88-4d62-bd27-ed75e0f728f7/306481854_5313747168674555_6710607910031314342_n.jpg)
![[FD3S RX7] Strut Brace Guards](https://media.printables.com/media/prints/803547/images/6219782_a9fb5d9f-5850-4d5a-b766-74b95bfaa8da_6a433a17-9d3f-4456-b9be-824447d1ad6b/strutbraceguards_full-1.png)
![[FD3S RX7] Trunk Tool Cover Clip](https://media.printables.com/media/prints/157376/images/1471063_a315262b-58c3-46f2-a871-6084939c594b/large_display_trunk_tool_cover_clip_v7_157376.png)
![[FD3S RX7] Sunroof Screw Cover](https://media.printables.com/media/prints/157373/images/1471049_aa3cec9e-1460-4184-a2b3-531eb2189c20/large_display_sunroofscrewcover_crp_157373.png)
