muzi.works H1 Charging Cradle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a charging & data cradle for the muzi.works H1 Case for Heltec V3.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 113
- Makes
- 2
- Views
- 1,165
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a charging cradle for the muzi.works H1 for the Heltec V3. It allows the device to stand upright while charging or while it is hooked up to a computer. It uses these (amazon) right angle USB C connectors which fit inside the bottom. The base is secured with 4 M3-8 Or 4 M3-10 Screws.. You will also need 4 M3 Heat Inserts from CNC Kitchen here (CNC Kitchen). Other threaded inserts may also work.
The modeled in supports are designed around a .2mm layer height. The models must also be reorientated before printing. They will print best with the flat bottom facing down.
I recommend printing these with at least 3-4 walls as the heat inserts will have a lot of pressure pulling on them as you tighten on the base and i have found they stay in better with more than 2 walls. I also recommend printing at a higher infill for weight and stability.