1 / 5
MK4/S Y-axis overhaul remix for PCCF
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three parts were remixed: the Y-motor holder (mount), the Y-belt mount and Y-belt retainer.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 73
- Makes
- 2
- Views
- 532
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
If you have an MK4 or 4S, you may need this remix. The Y-motor holder was striking the bottom part of the Y-carriage, so the height was reduced to be the same height as the printer's original Y-motor holder.
The Y-belt mount and retainers were remixed to increase clearances as they were so stiff it was very time-consuming to get the belts aligned correctly in the grooves. The belt should not fall out easily as they are secured in place by two M3x10 screws.