Super Metroid Emblem Extruder Indicator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Samus' Emblem from Super Metroid as an extruder indicator / visualizer.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 40
- Makes
- 1
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Any Metroid fans around? Here is my take on Samus' emblem that you can use as an extruder indicator.
Print in PETG or PLA with 100% infill and glue 2x 8x3mm magnets to the back of the print. For multiple colors use print stops where needed (in .3mf already added).
Note:
Initially I printed the emblem with a 0.4mm nozzle but I was't satisfied with the quality. The problem is, that because of the sharp angles there were a lot of holes on the surface. So I reprinted it with a 0.25mm nozzle and now it looks great. That's the way to go to achieve the best outcome with this model.
With a litte tweaking and tuning in the setting it may be possible to also get a good result with a 0.4mm nozzle.
Have fun and happy printing.