Case for Multicam KDM20-G Pendant
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case I designed to protect the KDM20-G pendant that many older Multicam CNC machines use for machine operation
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a case I designed to protect the KDM20-G pendant that many older Multicam CNC machines use for machine operation.
Accidents happen, and unfortunately these pendants can be quite fragile. Just a short drop can be enough to crush the outside shell, causing the board to split and break the leads for the button matrix.
This case is designed to be printed in TPU, and is in the correct orientation for printing, although supports are required. Support from build plate only should be fine, and I use an overhang threshold of 30%. I recommend printing with 4 perimeters and a relatively dense 3d infill like cubic at around 30-40%. I also recommend minimum of 5 top and bottom layers.
The case should be a tight fit if your printer is decently tuned for printing with TPU. I have been using this case on my controllers for a while with no issues. The E-stop is still easily accessible and shouldn't be obstructed, and all buttons are easily accessed as well.
Please let me know if you print this case!
I have included an STL, as well as a STEP