1 / 5
Power Supply Housing DPS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for switching power supply and programmable laboratory power supply DPS
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Housing 270x120x120 mm for a programmable laboratory power supply.
Built in:
Switching power supply Meanwell RS-150-15, 199x98x38 mm
Controller DPS3012 (others will probably also fit)
Axial fan 40x40x10 24 V
Power switch
Laboratory sockets 4 mm
Melt nut M3 D4.6xL5.7
M3 cylinder head screws
Housing printed from PLA, feet printed from TPU.
The Distanz is between the switching power supply and the housing, the Beilage (PLA) comes between the screw and the feet.