Ender 3 Pro powersupply cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make your printer save. Mine was dangerous by default!
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 59
- Makes
- 2
- Views
- 922
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Alternative powersupply cover for Ender 3 Pro with Meanwell LRS-350-24 supply.
I was shocked to discover that the standard power supply cover of my Ender 3 Pro is open on the bottom side and a contact of the power switch is exposed. If you touch it while the power cord is plugged in, you will get an electric shock!
In addition, the cover is very tight inside and cables from the secondary and primary side are pressed together without additional insulation in between.
After I added some tape and an additional heat shrink (the blue one) around the contacts of the secondary side to ensure a minimum of safety, I made a new cover.
This offers a comfortable and separated access to the contacts of the secondary side, so that you don't have to remove the whole power supply every time you want to connect accessories.