Spool Lamp for Home Decor and Diwali
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.02 – €1.25 net (excluding VAT)
For file: 1h07m_3 Spool Lamp middle joint.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.14 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Large vase-mode lamp on filament spool, prints in under 8 hours, interlocks easily for home decor or Diwali lighting.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 44
- Makes
- 0
- Views
- 294
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This unique lamp design uses an empty filament spool to create a striking home decor piece or Diwali kandil. With dimensions of 20cm x 20cm x 30cm, this lamp is large but optimized for the Ender 3 by dividing it into 3 interlocking parts. Thanks to vase mode, all parts print exceptionally fast (under 8 hours total) while maintaining impressive dimensions and quality. The parts are easy to assemble, making this an ideal choice for festive or everyday ambiance.
Multi-Purpose Use: Perfect as a decorative home lamp or as a traditional Diwali kandil.
Fast Vase Mode Printing: All parts print quickly in vase mode, completing the lamp in less than 8 hours.
Eco-Friendly Base: Repurposes an empty filament spool, blending sustainability with style.
Easy Assembly: Interlocking parts fit securely—no screws required.
Print Settings:
Vase Mode: Enabled for all parts
Layer Height: 0.24mm with 0.5mm thickness
Infill: Not needed due to vase mode
Material: PLA for aesthetics or PETG for enhanced durability
This lamp adds warmth and charm to any space and is a quick, efficient print, ideal for DIY enthusiasts or those gearing up for Diwali !!!
These is the link to all my fast print lamp ccollection and candle lamps https://www.printables.com/@saurabhrane_1101118/collections/1689617