1 / 3
Cigar humidor with magnetic lid — image 1
1 / 3

Cigar humidor with magnetic lid

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cigar humidor with magnetic lid. Separate files for lettering and handle.

Rating
0 / 5
Likes
16
Downloads
56
Makes
0
Views
855
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

Print each piece according to your color choice. add in a color change point in your slicer to achieve multi-color on the Cohiba plate. There are inset spots on the lid and box to properly place the handle and lettering. The humidity gauge can be purchased from Amazon and Plexi-glass for the lid can be purchased from most hardware stores. Line the bottom of the box with (2) 3 ½" cedar planks and felt. Use the same size cedar plank for the sides. Cut the front and back panels first and bevel the short ends before installing. There is NO need to bevel the side pieces. Be sure that the side pieces are a snug fit. Cut a divider piece slightly shorter than the side pieces and remove non-grooved edge of plank (shorten width) and install divider stands to grooved edge of plank. Use 5mm diameter magnets and glue into place.

Tags