BILT Nomad/Techno 3.0 Modular Visor Pins (for Pinlock)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement visor pins for the BILT Nomad and BILT Techno 3.0 modular helmets.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
The stock pins are a pain in the butt. They're not only super small, but they are made of transparent plastic, making them invisible in your floor if you drop them trying to install your Pinlock. Ask me how I know.
That is why instead of making another pilgrimage to Cycle Gear to beg for more pins, I designed these instead :)
You may want to scale it up or down to 101% or 99% depending on if they fit loosely or not at all. I used a 0.2mm nozzle and you should too, in your choice of hard material (I used PLA+ but PETG may be better, idk lol). I didn't need to use supports for my prints but if your cooling sucks you may want to use them just in case, because there are a lot of overhangs. Use brims too
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Changelog:
10.27.24 - V3. Shortened slightly, strengthened where the pin bends, with more chamfers for easier printing.