1 / 5
Kasa HD Indoor PTZ Outdoor Security Door Camera Cover — image 1
1 / 5

Kasa HD Indoor PTZ Outdoor Security Door Camera Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Kasa HD Indoor PTZ Camera housing to convert it for "light weather" handling.

Rating
0 / 5
Likes
2
Downloads
9
Makes
0
Views
223
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a cover that I made for an extra camera I had. Let's face it, I want to buy the fancy Ring, but I have this extra gadget. My brain must make use of it, so why not? And I'd be more broke than I am if I bought EVERYTHING I “wanted.” Don't get me started on my Raspberry Pi plans… I digress… My urgency is nothing but laziness and sweet little neighborhood children that ring my doorbell if … anything… moves… near my house. J/K They're cool - but  excessive ringing is frustrating. There… NOW I am done digressing. #Bawk
 


This is not meant to protect against heavy weather, the camera I am using is indoor rated, and I am willing to assume the risks. My main worry will be condensation with rapid spring/fall swings. I am going to try it anyway. :) I have ideas for a desiccant and a proper “cover” to make a weather barrier. Since the Kasa was not designed for the angle I have it at (for the PTZ) it is limited but it has patrol modes, face following, “person alerts”, and night vision. It will work for a limited-range door cam! And nothing like a white item to show dust and how much I really need to wipe down the outer door frame. Oh well, add that to the list…

Items
 

 

What I did…
 

  • Feed the cord through reverse from the underside
  • Connect the device to the unpowered charging USB cable
  • Correctly position and set the camera into the base with the charging cable sling into the cutout
    • (Optional) Apply superglue to the base of the camera
    • I discovered that I did not need to glue in place
  • Connect the separate base piece and use 4 tiny screws on each side, I applied a small amount of sealant to the seal before screwing it together (low torque…)
  • I snaked the cable along the back grove lightly filled the hold and covered the cord with sealant
  • I placed the encased Kasa camera into position and screwed in the 3 weight bearing/mounting screws
    • Note, this is a “thin” design so torquing the screws too tight may “warp” the shape
    • I had to play with the tension when it interfered with my camera rotation
  • The additional plate goes between the wall and camera housing like a gasket. I applied a thin ring of sealant before screwing it in place.
  • I did file here and there to ensure the smoothest yet tightest fit

Some “Specs”

  • ~82 mm max base width
    • Since the “top” of the Kasa base rotates, I did have to cut out about 0.75mm for “spinning” clearance
  • ~117 mm max-height
  • “Interlocking” base sections
  • “Gasket” or “Cover” plate to seal the cord entry
  • Able to get a standard USB end into the base through the cord hole
  • I used 1X3mm screws for the side, you could go up in size a little - it's not weight bearing, more to close the “gap” between housing pieces
  • I used random long screws that I had but cut holes for ~4mm

Future Design Thoughts - Potential Remixes?

  1. The holes on the sides are small, and I could thicken the walls to make it more sturdy
  2. Insert / dessicant panel
  3. Dome / Cover
    1. Dust and water will be the end of electronics over time
    2. Considering PET cutouts - if someone has ideas, would love to know!
  4. The camera is 5V + many solar batteries are 5V - portable wifi camera
  5. Smooth out the design overall, a few “choppy” areas as I cut/molded it and designed it

 

I have printed this about 6 times to tweak little things here and there. Feedback is always welcomed. I am still learning Fusion, design, and printing :)

                                               THANK YOU AND HAPPY PRINTING

                                                                                          #Bawk

 

Tips always welcome

$ChickenCordon

Tags