Bobby Bill Mouse Trap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy/cheap mouse trap to make
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Saw a trap at the local farm store for $30!!! I didn't like the price tag and figured I could model up the top and bottom and then use the wire mesh I had from previous projects.
So, here ya go! A 3D printed version of that same mouse trap and it only cost a few dollars to make.
You put food/bait in the trap, the mice climb up the wire, go into the hole in the top, and can't climb back out. This can be used as a catch and release trap or however you see fit.
It will hold multiple mice with no need to reset.
I made the top and bottom walls tall/long enough to add screws if you want it more secure to the wire mesh than just press fit.