Bobby Bill Mouse Trap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy/cheap mouse trap to make
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Saw a trap at the local farm store for $30!!! I didn't like the price tag and figured I could model up the top and bottom and then use the wire mesh I had from previous projects.
So, here ya go! A 3D printed version of that same mouse trap and it only cost a few dollars to make.
You put food/bait in the trap, the mice climb up the wire, go into the hole in the top, and can't climb back out. This can be used as a catch and release trap or however you see fit.
It will hold multiple mice with no need to reset.
I made the top and bottom walls tall/long enough to add screws if you want it more secure to the wire mesh than just press fit.