Flipper Cleaner Float Nano Extension Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We needed a way to get our Flipper Nano between our fish tanks that are 50mm apart, so I made this.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
This was created so we can clean the side of our tanks that are only 50mm apart, but it should also be useful for those with long aquariums, or tanks next to walls.
It fits the ¼ inch Flipper Cleaner Float Nano: Amazon AU or Amazon USA
For the pole, I used 15mm pressure PVC pipe: Bunnings AU or Amazon USA (There might be a better imperial size to use, but aim for 17mm inner diameter)
I drilled the pipe and used an M6 bolt to secure the parts together.
Print as imported with PETG for a some flexibility in the part. It grips well with PETG, but PLA might snap. You'll need supports for this one.
Happy cleaning!