Leftover filament Prusament spool
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.17 – €1.43 net (excluding VAT)
For file: Mystery spool inner_0.3mm_PETG_MK3S_1h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.30 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.18 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Keep your small lengths of leftover filament on the spool.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 44
- Makes
- 0
- Views
- 682
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
I collected a lot of leftover filament over the years, and most of the filament is off the spool to save space. This often ends with a tangled mess that is hard to store and print. I modified a leftover spool by removing the inner tube with printed partitions to store multiple types of filament.
I included spool partitions for a Prusament spool and a mystery spool – sadly, I can't remember who made the mystery filament spool, but the blend file is included if you need to adapt this model to suit your needs.
This will only work if your spool's inner tube is attached via friction/clips. This won't work for spools that are glued together.