MMU3: Buffer Leg-Adapter backside
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.93 – €2.36 net (excluding VAT)
For file: mm3-buffer - leg+adapter___0.2mm_PETG_MK3S_2h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.15 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2.45 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mounting adapter for a second support leg on the back of the buffer.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 43
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
If you want to set up the buffer without the original connection to the printer, the buffer is not secure.
A second stand is required for this. In order to be able to use the original stand (which is already used on the front) at the back, you need an adapter. The stand is screwed to the adapter in the same way as on the front.
needed tools:
2.5mm Allen key for M3 screws
needed parts:
- Leg-adapter (1x) → (this part)
- Buffer-leg (1x)
- M3x30 screws (2x)
- M3nS nuts (2x)
assembly:
- Insert the protruding parts of the Buffer leg into the openings in the leg-adapter. Push it all the way in.
- Insert the two M3nS nuts into the small openings in the leg-adapter. Push them all the way in.
- Slide the buffer plates into the leg adapter.
- Insert the two M3x30 screws into the openings on the side of the leg-adapter. Tighten them up. (If the screw doesn't go in, make sure all the holes align with the plates.)
- complete! You now have a secure buffer.
--------------------
print settings:
- the same as for all other printing parts of the buffer
- PETG
- 0.2mm layer
- 20% infill
- no supports needed