Counting matching models…
The backside of the screen features a small window for easier access to the SD card without the need to disassemble the screen. There is also space for 6 washers with a diameter of 20mm for the magnetic mount. Update: The user…
I lost the backside of my Volvo XC90 key fob and created a new one in Fusion 360 There are two models with and without a Volvo logo. The step-file is also included in case you want to create your own logo
ENG: I like the original version from Gerard Artigas. It's well designed and works with all versions of the Fire TV remote. Event the newer ones with all that buttons below the volume rocker. But I didn't like the gap at the rear and…
I couldn't find a cover for the backside of the Y-Axis of my Ender. There's a spinny wheel with a teethy belt around it, way to dangerous! This is as simple as it gets. Needs longer screws. Prints without support. Screws may need a small…
Audi A4 B6 front seat clip for backside panel with M3 screws as a additional rigidity support. Enjoy. Print Settings Printer Brand: Raise3D Printer: Pro2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Filament: Devil Design ABS+…
TL;DR A very good purge solution for bambulab printers inside of cabinets or enclosures, strongly following the KISS principle. update 2023.0507 added a slimmer version, 50 mm wide at the left but 250 mm long FOLDER: slim version for IKEA…
A holder for a Chromecast with Google TV. To keep the stress from a dangling device on a HDMI cable Use double sided tape to attach it to the back of your TV Prusa PLA Might use some supports on the inner curve / overhang
this print just allows you to place the washers in mid print (at 50%) to trap them in case you dont quite have the right sized washers like myself and dont want to glue them in. i used 18mm washers about 1.4mm thick, i believe this was…
Mounting frame for Waveshare ST3215 servo motor. I hope it will be useful to anyone involved in robotics, hobby, 3D printing. I suggest support only for the slots for the screw head, everything else works perfectly without support. The…
Cable clips that fit to the back of the Prusa MK4/MK4S without hindering movement of the heatbed. Can hold 4 cables of ~7mm diameter (or more if they're thinner).
Backside Vent for Lack Enclosure v2 with MMU2s. Comes with holes for the filament tubes and two sliding doors for better ventilation when printing PLA. Opening is big enough to fit a hand through, so it's also good for simple backside…
In my experience in warm weather or a warm room, cooling can be tricky with an enclosure even with the top off, so I made this small toolto keep the door on my Creality K1 open, added a bracket so it sits in place on the backside of the…
Sharkie Knife II handle for the back of the knife - This is a mirrored version of the front handle so that both sides of the knife have handles.
Because i just found a Hook which fits on the small side of the IKEA Smastad Bed i remixed the Model from jodo to make it fit on the Front and Backside of the Bed. These hooks are also in PLA good for Heavy things like a Backpack.
Circular Towel Holder with a flat backside for better adhesion.
Core One + Gen2 INDX rear mount for the filament sensor with integrated cable management – no loose cables outside the printer. This rear-mounted bracket is designed to provide the shortest possible filament path from the sensor to the…
this backplate is flush and has guides to put into the extrusion
It does not fit perfectly, but it is good enough for me. The replacement knifes do not fall out and I can use it to cut off the blade. The best way to print it is with the small flat side on the print bed, as in the picture I used PLA…
print with support
Modelname says everything. I designed a Poop Box for the Qidi Max 4, like the design idea most know from different Printers. On the backside of the printer, use the 2 original screws on the lower side from the exit, to mount the frame.…
As the small filters do not work as effective as I wanted I have made own design. As base is used the connecting flange for 125mm pipe. The carbon filters are clamped against notch in the middle of the flange. 80mm fan is powered from…
Modified back pannel for car mirrors with a more complex back side layer height=0.1 mm first layer=0,2mm infill=100%
Place the backside edge of QIDI Plus4 lid on this lid riser, to rise the lid to have better air circulation when printing PLA. The lid can be closed without removing them. So, you can keep them always attached to your QIDI Plus4. They are…
Application Adds a reflector/diffuser and replaces the base from the night light lithophane from itslitho.com and others. The photo shows the improvement in light distribution. The hotspot is nearly eliminated and the illumination of the…
This Part replaces the flexible "rubber" parts on the backside of the stat clip, which are very fiddly to insert. I tested them of a few Dashboards, but if they turn out to be to tight give me some feedback. I included the Inventor Part…
If you want to set up the buffer without the original connection to the printer, the buffer is not secure. A second stand is required for this. In order to be able to use the original stand (which is already used on the front) at the…
The lid is designed with two circular cut-outs and according caps (plugs). This allows you to lead cables through it or close the holes if you don't. The plugs snap easily into place and can be easily removed again. Due to its size it's…
The hook can be used to mount accessory on the backside of an LG OLED TV. The hooks was created for an LG OLED C8 model, but may fit for other models as well. The base model is without any devices specific mount on the other end. Download…
This is a flexible TPU clip designed to snap into the honeycomb bed of a laser cutter or engraver , lifting your material slightly above the surface. Elevating the workpiece helps prevent the common “flash reflection” that can char or…
This simple cover was designed to protect the backside of the tester and have the battery easily accesible, but not dangling behind it. It uses 4 M3 8mm screws (but smaller screws would work too) Print instructions Category: Electronics…
Recently I had my side mirror stolen so I printed this mount to be glued with a mirror or a laser-cut acrylic mirror (DXF in the files) in the time the replacement arrives. If your car is going to be in the sun I recommend using PETG or…
Print withut supports 40 perimeters.
So I originally printed out the SKR MINI E3 V3 Case created by MrTeliP, but when I installed by SKR Mini E3 V3 board it wouldn't sit flush in the case by either 1mm on one side, or by a 4-5mm on the other side. It looked like with my…
Remix of @Duke_1130636 which was not covering the whole poop chute, and I made the box bigger for multicolor prints
I don't like the backside of the Hue Gu10 lamps, too much text and not the right color for me, so I made these caps
Hue adapter to attach hue led strips to a samsung tv to the wall mount holes
A cable holder with four slots intended to be mounted to the backside of a PC monitor. I use mine for extra cables coming from a KVM switch to a work laptop. When not using the work laptop, I disconnect the cables and store the free ends…
Adapter for backplate on the thule pack n padle tour rack. Fits for Bulls Backligt like shown in the picture.
Why be boring? If you have a coffee bar in your home in need of a clock, print this one up. No one else has one… yet! It's a novelty item that will be sure to start a conversation or get at least get laugh or two.
A backside for bitcoin with Satoshi Nakamoto
Niche usecase: I have a 18mm 'floating' board in the back of my kitchen cabinet. I figured thats free real estate! It uses a clamping mechanism which I thought is clever. There are threaded cilinders that move through a surface without…
This is a redesigned backside cover for the Prusa Mini display, created to give the fragile PCB a bit more love and protection. The stock display case leaves the board exposed to fingers, dust, and the occasional static‑charged “oops.”…
This is a remix of my laser module hold. In this version I have implemented a quick remove and a resting station for the laser, so I can switch fast from 3D printing to laser engraving and vice versa. Category: 3D Printer Accessories
This is a laser module holder to be mounted directly on the backside of the Tevo Tarantula' s X carriage. The advantage of this approach is to have both the laser module and the hotend mounted at the same time but the X cariage will be…
If you want to spice up your wardrobe backside because you have oriented the wardrobe in your room that shows its ugly back, this print is for you! You will need: a 3D printer that can print this lovely adapter a frameless picture frame…
Small covers that attach to the handle which would protect the fabric when the bag is on its back from wear and tear. The tears are already visible in the pictures. I printed as in the screenshot with supports. Just mirror the model on X…
MMU compatible with multi-part assembly.
Extended holes of the backside roll holder from Filament dry box, even cheaper for a better fit of M3 barrel head screws.
I had to lay some wires from the upper to the lower side on the backside of the RatRig. To prevent them touching the belt, I've created this simple bridge. It snaps on the 3030 and has openings to fix the wires inside the extrusion. Print…
its an easy to print wallet. it takes a bit of force to push the conecting pin in. you do this from the inside.
Core One + Gen2 INDX PTFE tube paths to the backside mounted filament sensors for 4 Tool, 6 Tool, 8Tool configurations Variants available: 4 Tool high mount (left and right side storage accessible) 6 Tool right mount (left side storage…
countersunk: Hole Diameter 3,75mm, Top Diameter 9,75mm countersunk B: Hole Diameter 3,5mm, Top Diameter 7mm cylindrical heads: Hole Diameter 3,75mm, Top Diameter 6,25mm
The glass on the back of my Nothing Phone (1) went loose. So, I made thing thing to glue it back and also to help phone lay flat. Bulky? Yes. Kolkhoz? Absolutely. But also! Improved grip Unique design The phone lays stable on its back
Introduction If you have Sonoff's SHZB-02P s you can place them on ferromagnetic surfaces already, since they are magnetic. If you want to stick them to a non-ferromagnetic sheet (like the wall of a plastic container) you'll need a…
This is a flexible TPU clip designed to snap into the honeycomb bed of a laser cutter or engraver , lifting your material slightly above the surface. Elevating the workpiece helps prevent the common “flash reflection” that can char or…
countersunk: Hole Diameter 3,75mm, Top Diameter 9,75mm countersunk B: Hole Diameter 3,5mm, Top Diameter 7mm cylindrical heads: Hole Diameter 3,75mm, Top Diameter 6,25mm
I had to lay some wires from the upper to the lower side on the backside of the RatRig. To prevent them touching the belt, I've created this simple bridge. It snaps on the 3030 and has openings to fix the wires inside the extrusion. Print…
ENG: I like the original version from Gerard Artigas. It's well designed and works with all versions of the Fire TV remote. Event the newer ones with all that buttons below the volume rocker. But I didn't like the gap at the rear and…
Niche usecase: I have a 18mm 'floating' board in the back of my kitchen cabinet. I figured thats free real estate! It uses a clamping mechanism which I thought is clever. There are threaded cilinders that move through a surface without…
Small covers that attach to the handle which would protect the fabric when the bag is on its back from wear and tear. The tears are already visible in the pictures. I printed as in the screenshot with supports. Just mirror the model on X…
Backside. hope you enjoy :-) Print in 2 mm Hight :-) Hope you share your print picture :-) follow and like for more
MK4 Kabel-Management für die Rückseite vom MK4 bessere Leitungsführung für die Verbindung zwischen den Bauteilen von links nach rechts. Look the pictures at this Parts from MK3:…
Die Verlegung der Leitungen von der PSU und dem rechten Motor der Z-Achse war mir schon zu Beginn ein Dorn im Auge. Nun konnte ich mit dem Aufbau des zweiten Druckers eine Entwichlung mir überlegen, die ich gerne mit euch teilen möchte.…
