1 / 7
Condor face shield Parts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement hinge parts for Condor face shield model 4EZC2
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Public Domain
Face Shield Replacement Parts
After my face shield fell and broke, I struggled to find replacement parts locally or online. So, I decided to design and print my own.
Recommended Filament:
- ASA or PLA+ are suitable for this print.
- Nylon-CF is not necessary for this application and would be excessive.
Print Settings: Adjust your settings according to your printer and filament type. My parts were printed using Polymaker Polylite Pro with these settings:
- Fan speed: 100% (as recommended by the manufacturer)
- Print speed: Max 70 mm/s, min 30 mm/s
- Nozzle size: 0.4 mm
- Layer height: 0.15 mm
- No Support.
- Brim: 5mm
Estimated Print Time & Material Usage:
- Print time: Approximately 1 hour and 30 minutes
- Filament usage: ~9 grams (actual usage may vary depending on your setup)
Bill of Materials (BOM):
- ~10 grams of PLA+ (or ASA)
- 1x M3 heat insert
- 1x M3 x 16mm bolt/screw (shorter screws may work; total length with bolt head was 18.8 mm, bolt head diameter: 5.00 mm)
Design Details: The CAD design was created in Ondsel ES (FreeCAD) and printed using an SV06 printer.
Written with the help of chatGPT.