K1 Unibody riser plate remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thinner and better supported version of the original. Originally intended for "clear" materials.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 52
- Makes
- 0
- Views
- 735
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I had some clear PETG laying around so I basically wanted to create windows for the riser part (knowing well that I will not see through it at all).
I recommend cutting the model in slicer at 45° to slightly hide the cut.
Printed on K1 with 0.4 nozzle.
Make sure to clean the tabs of support material well, because I tried to force one plate onto the frame and it resulted in 2 broken tabs : (
Print settings:
- bumped up my regular petg flow ratio (1.016 → 1.15)
- 0.2 layer height
- 0 top shell layers
- 0 bottom shell layers
- 100% aligned rectilinear infill
- 0 degrees solid infill direction
- rotate solid infill direction OFF
- first layer 40mm/s
- outer layer 100mm/s
- others 150mm/s
- automatic tree supports (buildplate only)
Print settings are only added to give you a place to start, they can be improved (a lot), but I was satisfied with the result.