1 / 2
Marching Lyre Phone Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches to a standard flip folder lyre and holds phones up to 3.5" wide. Compatible with most marching band instruments
- Rating
- 4 / 5
- Likes
- 13
- Downloads
- 141
- Makes
- 1
- Views
- 885
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recommended Settings (See sliced file):
- Material: PETG (PLA may soften if used outdoors)
- Brim: 5mm
- Special settings for sliding clamp: 3 perimeters, 6 top and bottom solid layers
Assembly Instructions:
V1: Run a ¼-20 or M6 tap through the hole in the clamp. Slide the clamp onto the rail of the main body, and insert a screw at least 5/8" or 14mm long to secure the clamp in place.
V2: Loop a rubber band through each hole on the main body, and hook the ends on the sliding clamp