Counting matching models…
Mouthpiece is playable with a little sanding to the surface that mates with the reed. No cork needed as the flexible bulb keeps the mouthpiece seated and secure within the clarinet. Opening is 1.28mm (0.05 in). Minimal supports needed.…
What's this? 3D printed PVC Membrane clarinet based on the plans and ideas from Nicolas Bras https://www.youtube.com/watch?v=Jk7J4_bneZo This instrument is quick and easy to print, and easy to play, you don't need any technique, just blow…
A friend of mine broke his clarinet's bell. I had to try this and it works perfectly well! This one is modeled quite accurately after my Buffet Crampon RC bell. From what I understand it's mostly the shape of the bell that has an effect…
this is a mini sax in B. the one i printed is the male one that works with the moutpiece in the file (put tape to make a tight fit) i used a standard wood reed and it sounds great. the femelle one should work with standard clarinet…
3D Printed reed case for soprano saxophone and Bb clarinet, size can be changed to fit other instrument reeds. Max of 8 reeds can be stored in the case. Extra material: 4 small round magnets needed for locking mechanism, 2 hinge pins (ex:…
The four clarinet barrels presented here are the culmination of many hours of barrel design research and play-testing. These are all designed for Buffet instruments so you may need to tweak the size to fit another brand. No, these barrels…
A curvy clarinet with a surprisingly low tone for its size! It plays a 6-note minor pentatonic scale in D. Requires a soprano sax mouthpiece and a soprano sax cork, or you can 3D Print a cork from the cork file out of TPU. The curvy shape…
Inspired by the membrane clarinets created by Nicolas Bras. Designed so everything is inline like a traditional clarinet. Requires the use of o-rings to seal the membrane compartment. O-ring dimensions: Inner Diameter ¾" Outer Diameter…
The original cap was lost, so I have found the clarinet cover of FeKo which I have adjusted to my needs.
Made this thumb rest on instruction of a friend musician. Print in TPU with infill of your choice to achieve softer or stiffer sensation. Recommended 20 to 35% with linear infill.
Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.
📄 Description: This is a fully 3D-printable clarinet reed designed to work with a standard Bb clarinet mouthpiece . Made from PLA , this reed is surprisingly functional, offering a playable experience for practice, testing, or…
Customized version of https://www.thingiverse.com/thing:2006116 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2006116 Instructions Using the following options: txt = length = 70 reed_cyl_rad = 14…
The components can be separated on this single STL, I suggest printing the body at 0.12 or 0.15 layer height 60% and 4 walls. The barrel the same, the bell can be 40% or less it has marginals effect on the sound. The keys need to be…
A working clarinet reed. Print settings: 0.08 mm Layers, 0.2 mm first layer, 75% 3D-Honeycomb-infill, PLA
This build was inspired by Nicolas Bras and his creaton of membrane clarinet with evenly spaced holes. This is not maybe that precise with tones, but it it based on same scale and tone progression he uses. For me best worked to just…
Customizable Ligature that fits all saxophones and clarinets Thumbscrew and plate ligature. Fully 3D printable requiring no additional hardware. Premade sizes are included for hard rubber Soprano, Alto, Tenor and Baritone mouthpieces. Use…
It's a clarinet mouthpiece cover to protect your mouthpiece from any harm that can reach it.
For the longest time I wanted to try a Silverstein Works ligature, but the prohibitively expensive price kept me away. This ligature, while not a direct clone of the Silverstein design, incorporates the main aspect that I think makes them…
This stand is based on an existing design. Print Instructions: Material: PLA (but you could use what you like) 20-25% infill Perimeters: 3 or 4 (the print will get its strength from the perimeters) Layer height: 0.25mm for the 1. layer,…
reed designed to heckin' loud
Clarinets of the Boehm (French) and Oehler (German) systems have different dimensions, which make their mouthpieces incompatible. These adapter barrels allow a mouthpiece from one system to mounted on a clarinet of a different system. The…
cover for bass clarinet mouthpiece
Stretch a membrane like a cut vinyl glove, balloon, etc. over the top, secure it with a rubber band, and blow into the side. The hole on the bottom is sized for a 22mm/0.8in outer-diameter pipe (I'm using a PVC pipe labeled as "½ inch")…
Edit: Photos are now posted, and Mk2.5 is now confirmed to work. Edit 2: There are now files for clarinets with an 80 mm bell, but those have a tab on the side instead of a receiver for the threaded insert. This thing is a system designed…
PETG 0.2mm structural is fine
Playing just the upper half of a clarinet can be fun, except it presents the challenge of maintaining good intonation in the lower note range, and keeping the instrument steady with just one hand. This device aims to fix both of those…
Print Instructions: Material: PLA (but you could use what you like) Indfill: I made it with 40% infill (3D honeycomb) just in case, but I think it should be rigid enaugh 15-25% as well. Perimeters: 3 or 4 Layer height: 0.25mm for the 1.…
This model converts a digital tire tread depth gauge into a mouthpiece tip opening measurement gauge. The tire tread depth gauge used in this photo is this Amazon listing . No other parts are needed, making the total cost less than $15…
This bass clarinet to bari sax adapter is just for fun. It works especially well when used with the Avatar Mojo Fave Bass Clarinet Mouthpiece (thingiverse thing:6576772). You will have intonation issues so don't use this to play music…
Mouthpiece cap for Vandoren LC54 bass clarinet ligature. Printed at 0.2mm height. It is a bit tight to keep it in place.
I decided to customize my pocket clarinet with a thumb rest. Seems to work well on the flat bottom of this remix. I placed my right hand where it was most comfortable and then super glued the thumb rest on. Super glue bonds within about a…
Gridfinity concept by Zack Freedman.
"The Cat" Ligature Leopard, Lion, and Tiger Variations USAGE "The Cat" gets its name from the design resemblance to a cat's face ("ears" on top and "eyes" on the bottom). Mounting orientation is two "ears" on the top left, one on the top…
This is essentially a shrunken version of H3dSprint 's clarinet mouthpiece cap. I reduced the size and closed the front a bit so that it would fit securely on a Vandoren Optimum ligature. I printed it in black PETG because I thought PLA…
This model is designed to hold a battery pack for Christmas lights that attaches to a clarinet.
Soak your reeds with this easy model. Even you have bridges, you don't need supports, because they would be really hard to remove. Print it with as much infill as you want, I would recommend 15-30 %.
Adapter to use Ton Kooiman Oehler thumb rest with Oscar Adler clarinets
The holes are about 14.7 cm apart. The handle shape is designed to be as similar to the original as possible, with different ends that should be a bit more durable. I recommend printing on the side with a brim, either with solid infill or…
If your clarinet stand broke like mine did, don't worry I will show you how to repair it. First, download the file and print it. While it's printing, you can remove the three legs from the sliding piece by unscrewing the three screws…
I'm calling this a “shim washer” for the floor peg knob of a Jupiter JBC-1000 bass clarinet. My son complained about not being able to tighten the floor stand peg of his bass clarinet. Though it had never tightened well, it finally got so…
Detailed 3D printable Squidward Clarinet figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers…
A curvy clarinet with a surprisingly low tone for its size! It plays a 6-note minor pentatonic scale in D. Requires a soprano sax mouthpiece and a soprano sax cork, or you can 3D Print a cork from the cork file out of TPU. The curvy shape…
The holes are about 14.7 cm apart. The handle shape is designed to be as similar to the original as possible, with different ends that should be a bit more durable. I recommend printing on the side with a brim, either with solid infill or…
A thing to attach a pencil to your clarinet. Usefull during band rehearsal. Pencil side diameter is 7 mm, clarinet side diameter is 3.6 mm. Its 9 mm tall. Print with PETG so that it can flex.
This build was inspired by Nicolas Bras and his creaton of membrane clarinet with evenly spaced holes. This is not maybe that precise with tones, but it it based on same scale and tone progression he uses. For me best worked to just…
The four clarinet barrels presented here are the culmination of many hours of barrel design research and play-testing. These are all designed for Buffet instruments so you may need to tweak the size to fit another brand. No, these barrels…
Un uñero de sujeción para el clarinete que sirve para poderse unir este con el soporte ergoclarinet de la marca ergobrass. adjunto dos modelos diferentes.
A thing to attach a pencil to your clarinet. Usefull during band rehearsal. Pencil side diameter is 7 mm, clarinet side diameter is 3.6 mm. Its 9 mm tall. Print with PETG so that it can flex.
I Modified the original cover in order to include my initials in the cover. you will need the original .stl as import file in order for my hack to work. I also added a space for a 6x9mm magnet to be inserted into the cap, if you are…
A travel clarinet stand. The central piece holds the stand together, assembled or not. Tested on Buffet Bb and Selmer A clarinets. Two “Bague” models are provided with different tolerances. Un support de clarinette de voyage, démontable.…
A simple stand for my Thomann clarinet in C . Simply print the two pieces, they slot into each other. You can store the stand disassembled in the pocet of the clarinet case. It is not the most stable stand (use it at your own risk), but…
TPU Thumb rest for clarinet. Thumb hurt like hell after long playing sessions. This small print helped a lot. Small print but high impact in playing clarinet for a long time. Should be printed in TPU. It just slides over metal thumb rest.
This is a barrel for the Eb clarinet. It is 41 mm tall, the measurements are based on my cheap plastic Eb clarinet. The cutout enables the use of Bb clarinet reeds without the need to shorten them. This is espectially useful if you want…
My take on the membrane clarinet. Only a sheet of thin plastic and a rubber band required as additional parts. I was quite impressed by Nicolas Bras' video about a membrane clarinet , and I wanted to 3d-print one completely without buying…
Customized version of https://www.thingiverse.com/thing:2006116 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2006116 Instructions Using the following options: txt = length = 69 reed_cyl_rad = 14…
Customized version of https://www.thingiverse.com/thing:2006116 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2006116 Instructions Using the following options: txt = length = 70 reed_cyl_rad = 14…
Customized version of https://www.thingiverse.com/thing:2006116 feel free to give any feedback on this remix Category: Music
This works like a big needle for cleaning sections of clarinets with a tissue or cloth. Category: Music
Update 07.02.24: Wall crossing of the low D fingerhole and connecting pins are fixed. https://marktsack.de/community/index.php?attachment/2236-chalumeau-plan-chalumeau-in-c-pdf/ 12.03.25: 3 Parts now added like in the Remix version.…
This is a two-piece clarinet stand which folds up so it can be stored in the bell of the clarinet inside the case. I feel that this is a strong print and I've used it with my clarinet, but obviously use this print at your own risk. Note:…
It is a Bb clarinet reed that functions. Pros: It is a quick print and is cheap to produce sound quality is decent. Cons: The plastic reed is harder to use and you must position it slightly higher on the mouthpiece.
Made for a Yamaha 2* Mouthpiece and it has 12mm clearance across for reeds.
A quick but relatively accurate model of a clarinet (well, it has all of the keys and levers at least) that has the right amount of detail to look great printed at small scale. Miraculously printed perfectly the first time on my base…
