1 / 4
Sipeed NanoKVM lite Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective case for the Sipeed NanoKVM Lite - an open-source KVM switch. Simple yet functional design with proper ventil
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 290
- Makes
- 0
- Views
- 1,929
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a custom-designed protective case for the Sipeed NanoKVM Lite, an open-source KVM switch that allows you to control multiple computers with a single keyboard and mouse. The case is designed to provide both protection and functionality while maintaining good airflow.
Features
- Perfect fit for NanoKVM Lite board
- Ventilation holes for proper heat dissipation
- Easy access to all ports and connections
- Compact and minimal design
- Simple two-part assembly
Printing Instructions
- Layer Height: 0.16mm (recommended)
- Infill: Not critical, 15-20% is sufficient
- Support: Tree supports needed only for mounting holes
- Material: PLA, PETG, or ABS will work
- No special print settings required
- Print both pieces flat on the build plate
Assembly
- Print both the top and bottom pieces
- Clean any support material, especially around the mounting holes
- Place the NanoKVM Lite board in the bottom piece
- Snap the top piece in place