Corolla Dash Speaker Adapter for Morel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Speaker adapter designed for Morel CDM-600
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 88
- Makes
- 0
- Views
- 522
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Client of mine was installing Morel Virtus 603 speakers on his GR Corolla, but the CDM-600 midrange was pretty large, the generic adapter was too small for it. So I designed and printed my own.
Printed with 100% infill and 3 perimeters in ABS. You'll need to do some minor modifications to the factory grilles and the dash for these to fit. I didn't have heated inserts on hand, so the model is designed to use screws and nuts to fix the speaker in place. I used 4-40 screws and nuts for this particular print as that was what I had available.
The grilles need to have the ring removed (shown in photos) and for the dash modification I used a hot knife (Habanero iron with heat knife tip) to have a more controlled cut on the dash. BE CAREFUL MODIFYING YOUR DASH, especially if you're using a hot knife. Always be mindful of where your knife is placed when you're done with it.
The bracket should fit other Toyotas that have a similar dash speaker shape.